Differences

This shows you the differences between two versions of the page.

--- сервис_qos [2009/05/14 16:36]
val
+++ сервис_qos [2020/05/07 07:37] (current)
val [Сервис QOS]
@@ Line 1: / Line 1: @@
 ====== Сервис QOS ======
+  * [[https://habr.com/post/420525/|Сети для самых матёрых. Часть пятнадцатая. QoS]]
+===== Уилиты для экспериментов =====
+  * [[Утилита iPerf]]
+<code>
+gate# apt install wondershaper
+gate# wondershaper eth1 10 10
+gate# wondershaper eth1
+gate# wondershaper clear eth1
+</code>
+===== Linux =====
+===== Cisco =====
+  * [[https://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/91862-cat3750-qos-config.html|Cisco Catalyst 3750 QoS Configuration Examples]]
+  * [[https://reggle.wordpress.com/2013/05/14/qos-part-v-hardware-queues-on-35603750-switch-platform/|QoS part V: hardware queues on 3560/3750 switch platform]]
+  * [[http://cisco-conf.ru/qos/90-qos-catalyst-3750-.html|3750 QOS: Общие принципы]]
+==== Включение ====
+<code>
+mls qos
+</code>
+==== Назначение QOS для трафика c определенным DSCP  ====
+  * [[https://dreamforccie.wordpress.com/2010/04/23/convert-phb-af-to-dscp-decimal-and-vise-versa-its-so-easy/|Convert PHB AF to DSCP Decimal and Vise Versa: It’s So Easy!]]
+  * [[https://supportforums.cisco.com/t5/wan-routing-and-switching/dscp-qos-value/td-p/920725|DSCP - QOS value]]
+<code>
+TOS: 0x000068b8
+show mls qos maps dscp-output-q
+interface GigabitEthernet1/0/1
+ mls qos trust dscp
+</code>
+==== Назначение DSCP для трафика c определенным профилем ====
+<code>
+no ip access-list extended IP-Communicator
+ip access-list extended IP-Communicator
+! permit udp any any range 10000 20000
+! permit ip any host 195.19.32.11
+ permit ip host 195.19.32.11 any
+class-map match-all Class-B
+ match access-group name IP-Communicator
+policy-map sample-policy2
+ class Class-B
+  set dscp ef
+interface GigabitEthernet1/0/2
+ service-policy input sample-policy2
+</code>
+==== Назначение QOS для трафика отдельного порта ====
+<code>
+show mls qos maps cos-output-q
+interface GigabitEthernet1/0/11
+ mls qos cos 5
+ mls qos trust cos
+</code>
+==== Выделение полосы в магистральном соединении для трафика с определенным QOS ====
+<code>
+sh mls qos queue-set
+show mls qos interface g1/0/47 queueing
+interface GigabitEthernet1/0/47
+! Full priority for q1
+ srr-queue bandwidth shape 0 0 0 0
+ srr-queue bandwidth share 255 1 1 1
+! 1/20 band for q1
+ srr-queue bandwidth shape 20 0 0 0
+ srr-queue bandwidth share 1 1 1 1
+clear mls qos interface g1/0/47 statistics
+show mls qos interface g1/0/47 statistics | inc queue
+</code>
 ===== Равномерное ограничение полосы для всех с исключениями =====
@@ Line 5: / Line 97: @@
 ==== FreeBSD (ipfw) ====
 <code>
-[gX:~] # cat /etc/ipfw.conf
+[gate:~] # cat /etc/ipfw.conf
-pipe 1 config bw 64kbit/s mask dst-ip 0xffffffff
+</code><code>
-pipe 2 config bw 100mbit/s
+pipe 1 config bw 100mbit/s
+pipe 2 config bw 64kbit/s mask dst-ip 0xffffffff
-add 10 pipe 2 ip from any to 192.168.100+X.2
+add 10 pipe 1 ip from any to 192.168.100+X.2
-add 20 pipe 1 ip from any to 192.168.100+X.0/24
+add 20 pipe 2 ip from any to 192.168.100+X.0/24
 add 100 allow ip from any to any
+</code><code>
-[gX:~] # cat /etc/rc.conf
+[gate:~] # cat /etc/rc.conf
-…
+</code><code>
+...
+dummynet_enable=yes
 firewall_enable="YES"
 firewall_type="/etc/ipfw.conf"
-…
+</code><code>
+[gate:~] # /etc/rc.d/ipfw start
-[gX:~] # kldload dummynet
+[gate:~] # ipfw pipe show
-[gX:~] # /etc/rc.d/ipfw start
 </code>
 ===== Балансировка нагрузки между провайдерами =====
-Использование PF
+==== FreeBSD (pf) ====
 http://www.openbsd.org/faq/pf/pools.html
 <code>
-[gX:~] # cat /etc/pf.conf
+[gate:~] # cat /etc/pf.conf
+</code><code>
 lan_net = "192.168.1X.0/24"
 int_if  = "tap0"
@@ Line 52: / Line 148: @@
    to any
 </code>

Методические материалы Лохтурова Вячеслава

User Tools

Site Tools

Differences

Page Tools