Differences

This shows you the differences between two versions of the page.

--- система_kubernetes [2022/07/14 09:45]
val [namespace для своего приложения]
+++ система_kubernetes [2025/04/05 08:39] (current)
val [kube-state-metrics]
@@ Line 1: / Line 1: @@
 ====== Система Kubernetes ======
+  * [[https://kubernetes.io/ru/docs/home/|Документация по Kubernetes (на русском)]]
   * [[https://youtu.be/sLQefhPfwWE|youtube Введение в Kubernetes на примере Minikube]]
@@ Line 7: / Line 9: @@
   * [[https://habr.com/ru/company/domclick/blog/577964/|Ультимативный гайд по созданию CI/CD в GitLab с автодеплоем в Kubernetes на голом железе всего за 514$ в год ( ͡° ͜ʖ ͡°)]]
   * [[https://habr.com/ru/company/flant/blog/513908/|Полноценный Kubernetes с нуля на Raspberry Pi]]
+  * [[https://habr.com/ru/companies/domclick/articles/566224/|Различия между Docker, containerd, CRI-O и runc]]
+  * [[https://daily.dev/blog/kubernetes-cni-comparison-flannel-vs-calico-vs-canal|Kubernetes CNI Comparison: Flannel vs Calico vs Canal]]
   * [[https://habr.com/ru/company/vk/blog/542730/|11 факапов PRO-уровня при внедрении Kubernetes и как их избежать]]
   * [[https://github.com/dgkanatsios/CKAD-exercises|A set of exercises that helped me prepare for the Certified Kubernetes Application Developer exam]]
+  * [[https://www.youtube.com/watch?v=XZQ7-7vej6w|Наш опыт с Kubernetes в небольших проектах / Дмитрий Столяров (Флант)]]
+  * [[https://habr.com/ru/companies/aenix/articles/541118/|Ломаем и чиним Kubernetes]]
 ===== Инструмент командной строки kubectl =====
   * [[https://kubernetes.io/docs/reference/generated/kubectl/kubectl-commands]]
+  * [[https://kubernetes.io/ru/docs/reference/kubectl/cheatsheet/|Шпаргалка по kubectl]]
 ==== Установка ====
+=== Linux ===
 <code>
-root@gate.corp13.un:~# curl -LO https://storage.googleapis.com/kubernetes-release/release/`curl -s https://storage.googleapis.com/kubernetes-release/release/stable.txt`/bin/linux/amd64/kubectl
+# curl -LO https://storage.googleapis.com/kubernetes-release/release/`curl -s https://storage.googleapis.com/kubernetes-release/release/stable.txt`/bin/linux/amd64/kubectl
-root@gate.corp13.un:~# chmod +x kubectl
-root@gate.corp13.un:~# mv kubectl /usr/local/bin/
+# chmod +x kubectl
+# mv kubectl /usr/local/bin/
 </code>
-==== Подключение к кластеру ====
+=== Windows ===
-  * Если не minikube, то достаточно только копию .kube/config
+  * [[https://kubernetes.io/docs/tasks/tools/install-kubectl-windows/|Install and Set Up kubectl on Windows]]
-  * [[https://habr.com/ru/company/flant/blog/345580/|см. Настройка GitLab Runner]]
 <code>
-student@node2:~$ tar zcf kube-config.tar.gz .kube/config .minikube/ca.crt .minikube/profiles/minikube
+cmder$ curl -LO "https://dl.k8s.io/release/v1.29.0/bin/windows/amd64/kubectl.exe"
-gitlab-runner@gate:~$ scp student@node2:kube-config.tar.gz .
+cmder$ mv kubectl.exe /usr/bin
+</code>
-gitlab-runner@gate:~$ tar -xvf kube-config.tar.gz
+==== Подключение к кластеру ====
-gitlab-runner@gate:~$ cat .kube/config
+<code>
+mkdir ~/.kube/
+scp root@192.168.X.2N1:.kube/config ~/.kube/
+cat ~/.kube/config
 </code><code>
 ...
-    certificate-authority: /home/gitlab-runner/.minikube/ca.crt
+    server: https://192.168.X.2N1:6443
 ...
-    client-certificate: /home/gitlab-runner/.minikube/profiles/minikube/client.crt
+</code><code>
-    client-key: /home/gitlab-runner/.minikube/profiles/minikube/client.key
+kubectl get all -o wide --all-namespaces
+kubectl get all -o wide -A
+</code>
+=== Настройка автодополнения ===
+<code>
+kube1:~# less /etc/bash_completion.d/kubectl.sh
+  или
+$ cat ~/.profile
+</code><code>
+#...
+source <(kubectl completion bash)
+alias k=kubectl
+complete -F __start_kubectl k
+#...
+</code>
+=== Подключение к другому кластеру ===
+<code>
+gitlab-runner@server:~$ scp root@kube1:.kube/config .kube/config_kube1
+gitlab-runner@server:~$ cat .kube/config_kube1
+</code><code>
+...
+    .kube/config_kube1
 ...
 </code><code>
-gitlab-runner@gate:~$ kubectl get all -o wide --all-namespaces
+gitlab-runner@server:~$ export KUBECONFIG=~/.kube/config_kube1
+gitlab-runner@server:~$ kubectl get nodes
 </code>
 ===== Установка minikube =====
-  * [[https://www.linuxtechi.com/how-to-install-minikube-on-ubuntu/|How to Install Minikube on Ubuntu 20.04 LTS / 21.04]]
   * [[https://minikube.sigs.k8s.io/docs/start/|Documentation/Get Started/minikube start]]
-  * Технология Docker [[Технология Docker#Предоставление прав непривилегированным пользователям]]
 <code>
-student@node3:~$ minikube delete
+root@server:~# apt install -y curl wget apt-transport-https
-student@node3:~$ minikube start --driver=docker --insecure-registry "server.corp13.un:5000"
+root@server:~# wget https://storage.googleapis.com/minikube/releases/latest/minikube-linux-amd64
-ИЛИ
+root@server:~# mv minikube-linux-amd64 /usr/local/bin/minikube
-</code><code>
-student@node2:~$ sudo apt install conntrack
-https://computingforgeeks.com/install-mirantis-cri-dockerd-as-docker-engine-shim-for-kubernetes/
+root@server:~# chmod +x /usr/local/bin/minikube
-...
+</code>
-wget https://github.com/kubernetes-sigs/cri-tools/releases/download/v1.24.2/crictl-v1.24.2-linux-amd64.tar.gz
+  * Технология Docker [[Технология Docker#Предоставление прав непривилегированным пользователям]]
+<code>
+gitlab-runner@server:~$ time minikube start --driver=docker --insecure-registry "server.corpX.un:5000"
+real    29m8.320s
 ...
-student@node2:~$ minikube start --driver=none --insecure-registry "server.corp13.un:5000"
+gitlab-runner@server:~$ minikube status
+gitlab-runner@server:~$ minikube ip
+</code>
+==== minikube kubectl ====
+<code>
+gitlab-runner@server:~$ minikube kubectl -- get pods -A
+gitlab-runner@server:~$ cat ~/.profile
 </code><code>
-student@node3:~$ minikube status
+#...
+# not work in gitlab-ci
+alias kubectl='minikube kubectl --'
+#...
+</code><code>
+gitlab-runner@server:~$ kubectl get pods -A
+</code>
-student@node3:~$ minikube ip
+или
-student@node3:~$ minikube addons list
+  * [[#Инструмент командной строки kubectl]]
-student@node3:~$ minikube addons configure registry-creds
+==== minikube addons list ====
+<code>
+gitlab-runner@server:~$ minikube addons list
+gitlab-runner@server:~$ minikube addons configure registry-creds
 ...
 Do you want to enable Docker Registry? [y/n]: y
--- Enter docker registry server url: http://server.corp13.un:5000
+-- Enter docker registry server url: http://server.corpX.un:5000
 -- Enter docker registry username: student
 -- Enter docker registry password:
 ...
-student@node3:~$ minikube addons enable registry-creds
+gitlab-runner@server:~$ minikube addons enable registry-creds
+</code>
-student@node3:~$ minikube dashboard &
+==== minikube start stop delete ====
+<code>
+gitlab-runner@server:~$ ###minikube stop
+gitlab-runner@server:~$ ### minikube delete
+gitlab-runner@server:~$ ### rm -rv .minikube/
+gitlab-runner@server:~$ ###minikube start
+</code>
+===== Кластер Kubernetes =====
+==== Развертывание через kubeadm ====
+  * [[https://kubernetes.io/docs/setup/production-environment/tools/kubeadm/install-kubeadm/|Installing kubeadm]]
+  * [[https://kubernetes.io/docs/setup/production-environment/tools/kubeadm/create-cluster-kubeadm/|kubernetes.io Creating a cluster with kubeadm]]
+  * [[https://www.linuxtechi.com/install-kubernetes-on-ubuntu-22-04/|How to Install Kubernetes Cluster on Ubuntu 22.04]]
+  * [[https://www.linuxtechi.com/install-kubernetes-cluster-on-debian/|https://www.linuxtechi.com/install-kubernetes-cluster-on-debian/|How to Install Kubernetes Cluster on Debian 12 | 11]]
+  * [[https://www.baeldung.com/ops/kubernetes-cluster-components|Kubernetes Cluster Components]]
+=== Подготовка узлов ===
+<code>
+node1# ssh-keygen
+node1# ssh-copy-id node2
+node1# ssh-copy-id node3
+node1# bash -c '
+swapoff -a
+ssh node2 swapoff -a
+ssh node3 swapoff -a
+'
+node1# bash -c '
+sed -i"" -e "/swap/s/^/#/" /etc/fstab
+ssh node2 sed -i"" -e "/swap/s/^/#/" /etc/fstab
+ssh node3 sed -i"" -e "/swap/s/^/#/" /etc/fstab
+'
+</code>
+=== Установка ПО ===
+=== !!! Обратитесь к преподавателю !!! ===
+== Установка и настройка CRI ==
+<code>
+node1_2_3# apt-get install -y docker.io
+Проверяем, если:
+node1# containerd config dump | grep SystemdCgroup
+не равно:
+           SystemdCgroup = true
+то, выполняем следующие 4-ре команды:
+bash -c 'mkdir -p /etc/containerd/
+ssh node2 mkdir -p /etc/containerd/
+ssh node3 mkdir -p /etc/containerd/
+'
+bash -c 'containerd config default > /etc/containerd/config.toml
+ssh node2 "containerd config default > /etc/containerd/config.toml"
+ssh node3 "containerd config default > /etc/containerd/config.toml"
+'
+bash -c 'sed -i "s/SystemdCgroup \= false/SystemdCgroup \= true/g" /etc/containerd/config.toml
+ssh node2 sed -i \"s/SystemdCgroup \= false/SystemdCgroup \= true/g\" /etc/containerd/config.toml
+ssh node3 sed -i \"s/SystemdCgroup \= false/SystemdCgroup \= true/g\" /etc/containerd/config.toml
+'
+bash -c 'service containerd restart
+ssh node2 service containerd restart
+ssh node3 service containerd restart
+'
+</code>
+== Подключаем репозиторий и устанавливаем ПО ==
+<code>
+bash -c 'mkdir -p /etc/apt/keyrings
+ssh node2 mkdir -p /etc/apt/keyrings
+ssh node3 mkdir -p /etc/apt/keyrings
+'
+bash -c 'curl -fsSL https://pkgs.k8s.io/core:/stable:/v1.30/deb/Release.key | gpg --dearmor -o /etc/apt/keyrings/kubernetes-apt-keyring.gpg
+ssh node2 "curl -fsSL https://pkgs.k8s.io/core:/stable:/v1.30/deb/Release.key | gpg --dearmor -o /etc/apt/keyrings/kubernetes-apt-keyring.gpg"
+ssh node3 "curl -fsSL https://pkgs.k8s.io/core:/stable:/v1.30/deb/Release.key | gpg --dearmor -o /etc/apt/keyrings/kubernetes-apt-keyring.gpg"
+'
+bash -c 'echo "deb [signed-by=/etc/apt/keyrings/kubernetes-apt-keyring.gpg] https://pkgs.k8s.io/core:/stable:/v1.30/deb/ /" | tee /etc/apt/sources.list.d/kubernetes.list
+ssh node2 echo "deb [signed-by=/etc/apt/keyrings/kubernetes-apt-keyring.gpg] https://pkgs.k8s.io/core:/stable:/v1.30/deb/ /" \| tee /etc/apt/sources.list.d/kubernetes.list
+ssh node3 echo "deb [signed-by=/etc/apt/keyrings/kubernetes-apt-keyring.gpg] https://pkgs.k8s.io/core:/stable:/v1.30/deb/ /" \| tee /etc/apt/sources.list.d/kubernetes.list
+'
+bash -c 'apt-get update && apt-get install -y kubelet kubeadm kubectl
+ssh node2 "apt-get update && apt-get install -y kubelet kubeadm kubectl"
+ssh node3 "apt-get update && apt-get install -y kubelet kubeadm kubectl"
+'
+Время выполнения: 2 минуты
+</code>
+=== Инициализация master ===
+  * [[https://stackoverflow.com/questions/70416935/create-same-master-and-working-node-in-kubenetes|Create same master and working node in kubenetes]]
+<code>
+root@node1:~# kubeadm init --pod-network-cidr=10.244.0.0/16 --apiserver-advertise-address=192.168.X.201
+Время выполнения: 3 минуты
+root@node1:~# mkdir -p $HOME/.kube
+root@node1:~# cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
+</code>
+=== Настройка сети ===
+<code>
+root@nodeN:~# lsmod | grep br_netfilter
+</code>
+  * [[Управление ядром и модулями в Linux#Модули ядра]]
+<code>
+root@node1:~# kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
+</code>
+=== Проверка работоспособности ===
+<code>
+root@node1:~# kubectl get pod --all-namespaces -o wide
+root@node1:~# kubectl get --raw='/readyz?verbose'
+</code>
+=== Подключение worker ===
+<code>
+root@node2_3:~# curl -k https://node1:6443/livez?verbose
+root@node2_3:~# kubeadm join 192.168.X.201:6443 --token NNNNNNNNNNNNNNNNNNNN \
+        --discovery-token-ca-cert-hash sha256:NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
+root@node2_3:~# curl -sSL http://127.0.0.1:10248/healthz
+root@node1:~# kubeadm token list
+root@node1:~# kubeadm token create --print-join-command
+</code>
+=== Проверка состояния ===
+<code>
+root@node1:~# kubectl cluster-info
+root@node1:~# kubectl get nodes -o wide
+root@node1:~# kubectl describe node node2
+</code>
+=== Удаление узла ===
+  * [[https://stackoverflow.com/questions/56064537/how-to-remove-broken-nodes-in-kubernetes|How to remove broken nodes in Kubernetes]]
+<code>
+$ kubectl cordon kube3
+$ time kubectl drain kube3 #--ignore-daemonsets --delete-emptydir-data --force
+$ kubectl delete node kube3
+</code>
+=== Удаление кластера ===
+  * [[https://stackoverflow.com/questions/44698283/how-to-completely-uninstall-kubernetes|How to completely uninstall kubernetes]]
+<code>
+node1# bash -c '
+kubeadm reset
+ssh node2 kubeadm reset
+ssh node3 kubeadm reset
+'
+</code>
+=== Настройка доступа к Insecure Private Registry ===
+=== !!! Обратитесь к преподавателю !!! ===
+  * [[https://github.com/containerd/containerd/issues/4938|Unable to pull image from insecure registry, http: server gave HTTP response to HTTPS client #4938]]
+  * [[https://github.com/containerd/containerd/issues/3847|Containerd cannot pull image from insecure registry #3847]]
+  * [[https://mrzik.medium.com/how-to-configure-private-registry-for-kubernetes-cluster-running-with-containerd-cf74697fa382|How to Configure Private Registry for Kubernetes cluster running with containerd]]
+  * [[https://github.com/containerd/containerd/blob/main/docs/PLUGINS.md#version-header|containerd/docs/PLUGINS.md migrate config v1 to v2]]
+== сontainerd ==
+<code>
+root@node1:~# mkdir -p /etc/containerd/
+root@node1:~# cat /etc/containerd/config.toml
+</code><code>
 ...
-Opening http://127.0.0.1:NNNNN/api/v1/namespaces/kubernetes-dashboard/services/http:kubernetes-dashboard:/proxy/ in your default browser
+      [plugins."io.containerd.grpc.v1.cri".registry.mirrors]
+        [plugins."io.containerd.grpc.v1.cri".registry.mirrors."server.corpX.un:5000"]
+          endpoint = ["http://server.corpX.un:5000"]
 ...
-/home/mobaxterm> ssh -L NNNNN:localhost:NNNNN student@192.168.13.230
+</code><code>
-Теперь, та же ссылка работает на win host системе
+node1# bash -c '
+ssh node2 mkdir -p /etc/containerd/
+ssh node3 mkdir -p /etc/containerd/
+scp /etc/containerd/config.toml node2:/etc/containerd/config.toml
+scp /etc/containerd/config.toml node3:/etc/containerd/config.toml
+systemctl restart containerd
+ssh node2 systemctl restart containerd
+ssh node3 systemctl restart containerd
+'
+root@nodeN:~# containerd config dump | less
 </code>
-===== Установка Kubernetes =====
+Проверка
-  * [[https://infoit.com.ua/linux/kak-ustanovit-kubernetes-na-ubuntu-20-04-lts/|Как установить Kubernetes на Ubuntu 20.04 LTS]]
+<code>
-  * [[https://www.cloud4y.ru/blog/installation-kubernetes/|Установка Kubernetes]]
+root@nodeN:~# crictl -r unix:///run/containerd/containerd.sock pull server.corpX.un:5000/student/gowebd
+</code>
+==== Развертывание через Kubespray ====
+  * [[https://github.com/kubernetes-sigs/kubespray]]
+  * [[https://habr.com/ru/companies/domclick/articles/682364/|Самое подробное руководство по установке высокодоступного (почти ಠ ͜ʖ ಠ ) Kubernetes-кластера]]
+  * [[https://habr.com/ru/companies/X5Tech/articles/645651/|Bare-metal kubernetes-кластер на своём локальном компьютере]]
+  * [[https://internet-lab.ru/k8s_kubespray|Kubernetes — установка через Kubespray]]
+  * [[https://www.mshowto.org/en/ubuntu-sunucusuna-kubespray-ile-kubernetes-kurulumu.html|Installing Kubernetes on Ubuntu Server with Kubespray]]
+  * [[https://kubernetes.io/docs/setup/production-environment/tools/kubespray/|Installing Kubernetes with Kubespray]]
+=== Подготовка к развертыванию через Kubespray ===
+  * [[Язык программирования Python#Виртуальная среда Python]]
 <code>
+(venv1) server# ssh-keygen
+(venv1) server# ssh-copy-id kube1;ssh-copy-id kube2;ssh-copy-id kube3;ssh-copy-id kube4;
+(venv1) server# git clone https://github.com/kubernetes-sigs/kubespray
+(venv1) server# cd kubespray/
+(venv1) server:~/kubespray# git tag -l
+(venv1) server:~/kubespray# git checkout tags/v2.26.0
+  или
+(venv1) server:~/kubespray# git checkout tags/v2.27.0
+(venv1) server:~/kubespray# time pip3 install -r requirements.txt
+(venv1) server:~/kubespray# cp -rvfpT inventory/sample inventory/mycluster
+(venv1) server:~/kubespray# cat inventory/mycluster/hosts.yaml
+</code><code>
+all:
+  hosts:
+    kube1:
+    kube2:
+    kube3:
+    kube4:
+  children:
+    kube_control_plane:
+      hosts:
+        kube1:
+        kube2:
+    kube_node:
+      hosts:
+        kube1:
+        kube2:
+        kube3:
+    etcd:
+      hosts:
+        kube1:
+        kube2:
+        kube3:
+    k8s_cluster:
+      children:
+        kube_control_plane:
+        kube_node:
+    calico_rr:
+      hosts: {}
+</code><code>
+(venv1) server:~/kubespray# ansible all -m ping -i inventory/mycluster/hosts.yaml
+</code>
+  * [[Сервис Ansible#Использование модулей]] Ansible для отключения swap
+  * [[Сервис Ansible#Использование ролей]] Ansible для настройки сети
+=== Развертывание кластера через Kubespray ===
+<code>
+~/kubespray# time ansible-playbook -i inventory/mycluster/hosts.yaml cluster.yml
+real    45m31.796s
+kube1# less ~/.kube/config
+~/kubespray# ###time ansible-playbook -i inventory/mycluster/hosts.yaml reset.yml
+real    7m31.796s
+</code>
+=== Добавление узла через Kubespray ===
+  * [[https://github.com/kubernetes-sigs/kubespray/blob/master/docs/operations/nodes.md|Adding/replacing a node (github.com/kubernetes-sigs/kubespray)]]
+  * [[https://nixhub.ru/posts/k8s-nodes-scale/|K8s - добавление нод через kubespray]]
+  * [[https://blog.unetresgrossebite.com/?p=934|Redeploy Kubernetes Nodes with KubeSpray]]
+<code>
+~/kubespray# cat inventory/mycluster/hosts.yaml
+</code><code>
+all:
+  hosts:
 ...
-root@node1:~# kubeadm init --pod-network-cidr=10.244.0.0/16 --apiserver-advertise-address=192.168.13.210
+    kube4:
 ...
-student@node1:~$ kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
+    kube_node:
+      hosts:
+...
+        kube4:
+...
+</code><code>
+(venv1) server:~/kubespray# time ansible-playbook -i inventory/mycluster/hosts.yaml cluster.yml
+real    6m31.562s
+~/kubespray# ###time ansible-playbook -i inventory/mycluster/hosts.yaml --limit=kube4 scale.yml
+real    17m37.459s
+$ kubectl get nodes -o wide
+</code>
+=== Добавление insecure_registries через Kubespray ===
+<code>
+~/kubespray# cat inventory/mycluster/group_vars/all/containerd.yml
+</code><code>
+...
+containerd_insecure_registries:
+  "server.corpX.un:5000": "http://server.corpX.un:5000"
+containerd_registry_auth:
+  - registry: server.corpX.un:5000
+    username: student
+    password: Pa$$w0rd
+...
+</code><code>
+~/kubespray# time ansible-playbook -i inventory/mycluster/hosts.yaml cluster.yml
+user    46m37.151s
+# less /etc/containerd/config.toml
+</code>
+=== Управление дополнениями через Kubespray ===
+<code>
+~/kubespray# cat inventory/mycluster/group_vars/k8s_cluster/addons.yml
+</code><code>
+...
+helm_enabled: true
+...
+ingress_nginx_enabled: true
+ingress_nginx_host_network: true
 ...
-student@node1:~$ kubectl get pod -o wide --all-namespaces
 </code>
 ===== Базовые объекты k8s =====
@@ Line 113: / Line 515: @@
   * [[https://kubernetes.io/ru/docs/reference/kubectl/docker-cli-to-kubectl/|kubectl для пользователей Docker]]
   * [[https://kubernetes.io/docs/tasks/run-application/run-stateless-application-deployment/|Run a Stateless Application Using a Deployment]]
 <code>
-$ kubectl create deployment my-debian --image=debian -- "sleep" "3600"
+$ kubectl api-resources
-$ kubectl get all
+$ ###kubectl run -ti --rm my-debian --image=debian --overrides='{"spec": { "nodeSelector": {"kubernetes.io/hostname": "kube4"}}}'
-$ kubectl get deployments
+$ kubectl run my-debian --image=debian -- "sleep" "60"
 $ kubectl get pods
+kubeN# crictl ps | grep debi
+kubeN# crictl images
+nodeN# ctr ns ls
+nodeN# ctr -n=k8s.io image ls | grep debi
+$ kubectl delete pod my-debian
+$ ###kubectl delete pod my-debian --grace-period=0 --force
+$ kubectl create deployment my-debian --image=debian -- "sleep" "infinity"
+$ kubectl get all
+$ kubectl get deployments
+$ kubectl get replicasets
+</code>
+  * [[#Настройка автодополнения]]
+<code>
 $ kubectl attach my-debian-NNNNNNNNN-NNNNN
 $ kubectl exec -ti my-debian-NNNNNNNNN-NNNNN -- bash
 Ctrl-D
+</code>
+  * [[Технология Docker#Анализ параметров запущенного контейнера изнутри]]
+<code>
 $ kubectl get deployment my-debian -o yaml
+</code>
+  * [[Переменные окружения]] EDITOR
+<code>
 $ kubectl edit deployment my-debian
+$ kubectl get pods -o wide
 $ kubectl delete deployment my-debian
-</code><code>
+</code>
-  [[https://kubernetes.io/docs/reference/glossary/?all=true#term-manifest|    Kubernetes Documentation Reference Glossary/Manifest]]
+  * [[https://kubernetes.io/docs/reference/glossary/?all=true#term-manifest|Kubernetes Documentation Reference Glossary/Manifest]]
-</code><code>
+<code>
 $ cat my-debian-deployment.yaml
 </code><code>
 apiVersion: apps/v1
-kind: Deployment
+kind: ReplicaSet
+#kind: Deployment
 metadata:
   name: my-debian
@@ Line 146: / Line 572: @@
     matchLabels:
       app: my-debian
+  replicas: 2
   template:
     metadata:
@@ Line 155: / Line 582: @@
         image: debian
         command: ["/bin/sh"]
-        args: ["-c", "while true; do echo hello; sleep 3;done"]
+        args: ["-c", "while :;do echo -n random-value:;od -A n -t d -N 1 /dev/urandom;sleep 5; done"]
+        resources:
+          requests:
+            memory: "64Mi"
+            cpu: "250m"
+          limits:
+            memory: "128Mi"
+            cpu: "500m"
       restartPolicy: Always
 </code><code>
-$ kubectl create -f my-debian-deployment.yaml
+$ kubectl apply -f my-debian-deployment.yaml #--dry-run=client #-o yaml
+$ kubectl logs -l app=my-debian -f
 ...
 $ kubectl delete -f my-debian-deployment.yaml
 </code>
 ==== namespace для своего приложения ====
+==== Deployment ====
+  * [[https://stackoverflow.com/questions/52857825/what-is-an-endpoint-in-kubernetes|What is an 'endpoint' in Kubernetes?]]
+  * [[https://matthewpalmer.net/kubernetes-app-developer/articles/kubernetes-volumes-example-nfs-persistent-volume.html|How to use an NFS volume]]
+  * [[https://www.kryukov.biz/kubernetes/lokalnye-volumes/emptydir/|emptyDir]]
+  * [[https://hub.docker.com/_/httpd|The Apache HTTP Server Project - httpd Docker Official Image]]
+  * [[https://habr.com/ru/companies/oleg-bunin/articles/761662/|Дополнительные контейнеры в Kubernetes и где они обитают: от паттернов к автоматизации управления]]
+  * [[https://stackoverflow.com/questions/39436845/multiple-command-in-poststart-hook-of-a-container|multiple command in postStart hook of a container]]
+  * [[https://stackoverflow.com/questions/33887194/how-to-set-multiple-commands-in-one-yaml-file-with-kubernetes|How to set multiple commands in one yaml file with Kubernetes?]]
 <code>
 $ kubectl create namespace my-ns
@@ Line 168: / Line 616: @@
 $ kubectl get namespaces
-$ ### kubectl create deployment my-webd --image=server.corp13.un:5000/student/webd:latest --replicas=2 -n my-ns
+$ ### kubectl create deployment my-webd --image=server.corpX.un:5000/student/webd:latest --replicas=2 -n my-ns
+$ ### kubectl delete deployment my-webd -n my-ns
+$ cd webd/
 $ cat my-webd-deployment.yaml
@@ Line 176: / Line 628: @@
 metadata:
   name: my-webd
-  namespace: my-ns
+#  annotations:
+#    kubernetes.io/change-cause: "update to ver1.2"
 spec:
   selector:
@@ Line 189: / Line 642: @@
       containers:
       - name: my-webd
-        image: server.corp13.un:5000/student/webd:latest
+#        image: server.corpX.un:5000/student/webd
+#        image: server.corpX.un:5000/student/webd:ver1.N
+#        image: httpd
+#        imagePullPolicy: "Always"
+#        lifecycle:
+#          postStart:
+#            exec:
+#              command:
+#              - /bin/sh
+#              - -c
+#              - |
+#                #test -f /usr/local/apache2/htdocs/index.html && exit 0
+#                mkdir -p /usr/local/apache2/htdocs/
+#                cd /usr/local/apache2/htdocs/
+#                echo "<h1>Hello from apache2 on $(hostname) at $(date)</h1>" > index.html
+#                echo "<img src=img/logo.gif>" >> index.html
+#        env:
+#        - name: PYWEBD_DOC_ROOT
+#          value: "/usr/local/apache2/htdocs/"
+#        - name: PYWEBD_PORT
+#          value: "4080"
+#        - name: APWEBD_HOSTNAME
+#          value: "apwebd.corpX.un"
+#        - name: KEYCLOAK_HOSTNAME
+#          value: "keycloak.corpX.un"
+#        - name: REALM_NAME
+#          value: "corpX"
+#        livenessProbe:
+#          httpGet:
+#            port: 80
+#            #scheme: HTTPS
+#        volumeMounts:
+#        - name: htdocs-volume
+#          mountPath: /usr/local/apache2/htdocs
+#        volumeMounts:
+#        - name: nfs-volume
+#          mountPath: /var/www
+#      volumes:
+#      - name: htdocs-volume
+#        emptyDir: {}
+#      volumes:
+#      - name: nfs-volume
+#        nfs:
+#          server: server.corpX.un
+#          path: /var/www
+#      initContainers:
+#      - name: load-htdocs-files
+#        image: curlimages/curl
+##        command: ['sh', '-c', 'mkdir /mnt/img; curl http://val.bmstu.ru/unix/Media/logo.gif > /mnt/img/logo.gif']
+#        command: ["/bin/sh", "-c"]
+#        args:
+#        - |
+#          test -d /mnt/img/ && exit 0
+#          mkdir /mnt/img; cd /mnt/img
+#          curl http://val.bmstu.ru/unix/Media/logo.gif > logo.gif
+#          ls -lR /mnt/
+#        volumeMounts:
+#        - mountPath: /mnt
+#          name: htdocs-volume
 </code><code>
-$ kubectl apply -f my-webd-deployment.yaml
+$ kubectl apply -f my-webd-deployment.yaml -n my-ns #--dry-run=client #-o yaml
-$ kubectl get all -n my-ns
+$ kubectl get all -n my-ns -o wide
-$ kubectl describe pod my-webd-NNNNNNNNNN-NNNNN -n my-ns
+$ kubectl describe -n my-ns pod/my-webd-NNNNNNNNNN-NNNNN
+$ kubectl -n my-ns logs pod/my-webd-NNNNNNNNNN-NNNNN #-c load-htdocs-files
+$ kubectl logs -l app=my-webd -n my-ns
+(доступны опции -f, --tail=2000, --previous)
 $ kubectl scale deployment my-webd --replicas=3 -n my-ns
+$ kubectl delete pod/my-webd-NNNNNNNNNN-NNNNN -n my-ns
+</code>
+=== Версии deployment ===
+  * [[https://learnk8s.io/kubernetes-rollbacks|How do you rollback deployments in Kubernetes?]]
+  * [[https://kubernetes.io/docs/concepts/workloads/controllers/deployment/#updating-a-deployment|Updating a Deployment]]
+<code>
+$ ###kubectl rollout pause deployment my-webd-dep -n my-ns
+$ ###kubectl set image deployment/my-webd-dep my-webd-con=server.corpX.un:5000/student/gowebd:ver1.2 -n my-ns
+$ ###kubectl rollout resume deployment my-webd-dep -n my-ns
+$ ###kubectl rollout status deployment/my-webd-dep -n my-ns
+$ kubectl rollout history deployment/my-webd -n my-ns
+</code><code>
+REVISION  CHANGE-CAUSE
+         <none>
+...
+N         update to ver1.2
+</code><code>
+$ kubectl rollout history deployment/my-webd --revision=1 -n my-ns
+</code><code>
+...
+    Image:      server.corpX.un:5000/student/webd:ver1.1
+...
+</code><code>
+$ kubectl rollout undo deployment/my-webd --to-revision=1 -n my-ns
+$ kubectl annotate deployment/my-webd kubernetes.io/change-cause="revert to ver1.1" -n my-ns
+$ kubectl rollout history deployment/my-webd -n my-ns
+</code><code>
+REVISION  CHANGE-CAUSE
+         update to ver1.2
+...
+N+1        revert to ver1.1
 </code>
@@ Line 203: / Line 771: @@
   * [[https://kubernetes.io/docs/concepts/services-networking/service/|Kubernetes Documentation Concepts Services, Load Balancing, and Networking Service]]
+  * [[https://alesnosek.com/blog/2017/02/14/accessing-kubernetes-pods-from-outside-of-the-cluster/|Accessing Kubernetes Pods From Outside of the Cluster]]
+  * [[https://stackoverflow.com/questions/33069736/how-do-i-get-logs-from-all-pods-of-a-kubernetes-replication-controller|How do I get logs from all pods of a Kubernetes replication controller?]]
 <code>
 $ ### kubectl expose deployment my-webd --type=NodePort --port=80 -n my-ns
+$ ### kubectl delete svc my-webd -n my-ns
 $ cat my-webd-service.yaml
@@ Line 213: / Line 786: @@
 metadata:
   name: my-webd
-  namespace: my-ns
 spec:
-  type: NodePort
+#  type: NodePort
+#  type: LoadBalancer
+#  loadBalancerIP: 192.168.X.64
   selector:
     app: my-webd
@@ Line 221: / Line 795: @@
   - protocol: TCP
     port: 80
-    targetPort: 80
+#    targetPort: 4080
-status:
+#    nodePort: 30111
-  loadBalancer: {}
 </code><code>
-$ kubectl apply -f my-webd-service.yaml
+$ kubectl apply -f my-webd-service.yaml -n my-ns
+$ kubectl describe svc my-webd -n my-ns
+$ kubectl get endpoints -n my-ns
+</code>
+=== NodePort ===
+  * [[https://www.baeldung.com/ops/kubernetes-nodeport-range|Why Kubernetes NodePort Services Range From 30000 – 32767]]
+<code>
 $ kubectl get svc my-webd -n my-ns
 NAME              TYPE       CLUSTER-IP       EXTERNAL-IP   PORT(S)        AGE
-my-webd-svc   NodePort   10.102.135.146   <none>        80:30350/TCP   18h
+my-webd-svc   NodePort   10.102.135.146   <none>        80:NNNNN/TCP   18h
+$ curl http://kube1,2,3:NNNNN
+</code>
+== NodePort Minikube ==
+<code>
+$ minikube service list
-student@node3:~$ minikube service my-webd -n my-ns --url
+$ minikube service my-webd --url -n my-ns
-http://192.168.49.2:30350
+http://192.168.49.2:NNNNN
-student@node3:~$ curl $(minikube service my-webd -n my-ns --url)
+$ curl http://192.168.49.2:NNNNN
+</code>
+=== LoadBalancer ===
+== MetalLB ==
+  * [[https://www.adaltas.com/en/2022/09/08/kubernetes-metallb-nginx/|Ingresses and Load Balancers in Kubernetes with MetalLB and nginx-ingress]]
+  * [[https://metallb.universe.tf/installation/|Installation]]
+  * [[https://metallb.universe.tf/configuration/_advanced_ipaddresspool_configuration/|Advanced AddressPool configuration]]
+  * [[https://metallb.universe.tf/configuration/_advanced_l2_configuration/|Advanced L2 configuration]]
+<code>
+$ kubectl apply -f https://raw.githubusercontent.com/metallb/metallb/v0.14.3/config/manifests/metallb-native.yaml
+$ kubectl -n metallb-system get all
+$ cat first-pool.yaml
+</code><code>
+---
+apiVersion: metallb.io/v1beta1
+kind: IPAddressPool
+metadata:
+  name: first-pool
+  namespace: metallb-system
+spec:
+  addresses:
+  - 192.168.X.64/28
+  autoAssign: false
+#  autoAssign: true
+---
+apiVersion: metallb.io/v1beta1
+kind: L2Advertisement
+metadata:
+  name: first-pool-advertisement
+  namespace: metallb-system
+spec:
+  ipAddressPools:
+  - first-pool
+  interfaces:
+  - eth0
+</code><code>
+$ kubectl apply -f first-pool.yaml
+...
+$ kubectl get svc my-webd -n my-ns
+NAME      TYPE           CLUSTER-IP     EXTERNAL-IP     PORT(S)        AGE
+my-webd   LoadBalancer   10.233.23.29   192.168.X.64   80:NNNNN/TCP   50s
+$ #kubectl delete -f first-pool.yaml && rm first-pool.yaml
+$ #kubectl delete -f https://raw.githubusercontent.com/metallb/metallb/v0.14.3/config/manifests/metallb-native.yaml
+</code>
+=== ClusterIP ===
+<code>
+kube1# host my-webd.my-ns.svc.cluster.local 169.254.25.10
+kube1# curl my-webd.my-ns.svc.cluster.local
+</code>
+== port-forward ==
+  * [[#Инструмент командной строки kubectl]]
+<code>
+node1/kube1# kubectl port-forward -n my-ns --address 0.0.0.0 services/my-webd 1234:80
+cmder> kubectl port-forward -n my-ns services/my-webd 1234:80
+</code>
+  * http://192.168.X.2N1:1234
+  * http://localhost:1234
+<code>
+node1/kube1# kubectl -n my-ns delete pod/my-webd...
+</code>
+== kubectl proxy ==
+  * [[#Инструмент командной строки kubectl]]
+<code>
+kube1:~# kubectl proxy --address='0.0.0.0' --accept-hosts='^*$'
+cmder> kubectl proxy
+</code>
+  * http://192.168.X.2N1:8001/api/v1/namespaces/my-ns/services/my-webd:80/proxy/
+  * http://localhost:8001/api/v1/namespaces/my-ns/services/my-webd:80/proxy/
+==== Удаление объектов ====
+<code>
+$ kubectl get all -n my-ns
+$ kubectl delete -n my-ns -f my-webd-deployment.yaml,my-webd-service.yaml
+или
+$ kubectl delete namespace my-ns
 </code>
 ==== Ingress ====
+  * [[https://kubernetes.github.io/ingress-nginx/deploy/#quick-start|NGINX ingress controller quick-start]]
+=== Minikube ingress-nginx-controller ===
   * [[https://kubernetes.io/docs/tasks/access-application-cluster/ingress-minikube/|Set up Ingress on Minikube with the NGINX Ingress Controller]]
-  * [[https://stackoverflow.com/questions/33069736/how-do-i-get-logs-from-all-pods-of-a-kubernetes-replication-controller|How do I get logs from all pods of a Kubernetes replication controller?]]
+  * [[https://www.golinuxcloud.com/kubectl-port-forward/|kubectl port-forward examples in Kubernetes]]
 <code>
-student@node2:~$ minikube addons enable ingress
+server# cat /etc/bind/corpX.un
+</code><code>
+...
+webd A 192.168.49.2
+</code><code>
+gitlab-runner@server:~$ minikube addons enable ingress
+</code>
+=== Baremetal ingress-nginx-controller  ===
+  * [[https://github.com/kubernetes/ingress-nginx/tags]] Версии
+  * [[https://stackoverflow.com/questions/61616203/nginx-ingress-controller-failed-calling-webhook|Nginx Ingress Controller - Failed Calling Webhook]]
+  * [[https://stackoverflow.com/questions/51511547/empty-address-kubernetes-ingress|Empty ADDRESS kubernetes ingress]]
+  * [[https://kubernetes.github.io/ingress-nginx/deploy/#bare-metal-clusters|ingress-nginx/deploy/bare-metal-clusters]]
+<code>
+server# cat /etc/bind/corpX.un
+</code><code>
+...
+webd            A       192.168.X.202
+                A       192.168.X.203
+gowebd          CNAME   webd
+</code><code>
+node1# curl https://raw.githubusercontent.com/kubernetes/ingress-nginx/controller-v1.3.1/deploy/static/provider/baremetal/deploy.yaml | tee ingress-nginx.controller-v1.3.1.baremetal.yaml
+node1# cat ingress-nginx.controller-v1.3.1.baremetal.yaml
+</code><code>
+...
+kind: Deployment
+...
+spec:
+...
+  replicas: 3    ### insert this (equial count of worker nodes)
+  template:
+...
+      terminationGracePeriodSeconds: 300
+      hostNetwork: true                    ###insert this
+      volumes:
+...
+</code><code>
+node1# kubectl apply -f ingress-nginx.controller-v1.3.1.baremetal.yaml
+node1# kubectl get all -n ingress-nginx
+node1# ###kubectl delete -A ValidatingWebhookConfiguration ingress-nginx-admission
+node1# ###kubectl delete -f ingress-nginx.controller-v1.3.1.baremetal.yaml
+</code>
+=== Ingress baremetal DaemonSet ===
+<code>
+kube1:~# mkdir -p ingress-nginx; cd $_
+kube1:~/ingress-nginx# curl https://raw.githubusercontent.com/kubernetes/ingress-nginx/controller-v1.12.0/deploy/static/provider/baremetal/deploy.yaml | tee ingress-nginx.controller-v1.12.0.baremetal.yaml
+kube1:~/ingress-nginx# cat ingress-nginx.controller-v1.12.0.baremetal.yaml
+</code><code>
+...
+apiVersion: v1
+#data: null
+data:
+  allow-snippet-annotations: "true"
+  use-forwarded-headers: "true"
+kind: ConfigMap
+...
+#kind: Deployment
+kind: DaemonSet
+...
+#  strategy:
+#    rollingUpdate:
+#      maxUnavailable: 1
+#    type: RollingUpdate
+...
+      hostNetwork: true                    ### insert this
+      terminationGracePeriodSeconds: 300
+      volumes:
+...
+</code><code>
+kube1:~/ingress-nginx# kubectl apply -f ingress-nginx.controller-v1.12.0.baremetal.yaml
+kube1:~/ingress-nginx# kubectl -n ingress-nginx get pods -o wide
+kube1:~/ingress-nginx# kubectl -n ingress-nginx describe service/ingress-nginx-controller
+</code><code>
+...
+Endpoints:                192.168.X.221:80,192.168.X.222:80,192.168.X.223:80
+...
+</code><code>
+kube1:~/ingress-nginx# ###kubectl delete -f ingress-nginx.controller-v1.12.0.baremetal.yaml
+</code>
+=== Управление конфигурацией ingress-nginx-controller  ===
+<code>
+master-1:~$ kubectl exec -n ingress-nginx pods/ingress-nginx-controller-<TAB> -- cat /etc/nginx/nginx.conf | tee nginx.conf
+master-1:~$ kubectl edit -n ingress-nginx configmaps ingress-nginx-controller
+</code><code>
+...
+data:
+  use-forwarded-headers: "true"
+...
+</code>
+=== ingress example ===
+  * [[https://stackoverflow.com/questions/49829452/why-ingress-serviceport-can-be-port-and-targetport-of-service|!!! The NGINX ingress controller does not use Services to route traffic to the pods]]
+  * [[https://stackoverflow.com/questions/54459015/how-to-configure-ingress-to-direct-traffic-to-an-https-backend-using-https|how to configure ingress to direct traffic to an https backend using https]]
+<code>
+node1# ### kubectl create ingress my-ingress --class=nginx --rule="webd.corpX.un/*=my-webd:80" -n my-ns
-gitlab-runner@gate:~/webd$ cat my-webd-ingress.yaml
+node1# cat my-ingress.yaml
 </code><code>
 apiVersion: networking.k8s.io/v1
 kind: Ingress
 metadata:
-  name: my-webd
+  name: my-ingress
-  namespace: my-ns
+#  annotations:
-  annotations:
+#    nginx.ingress.kubernetes.io/canary: "true"
-    nginx.ingress.kubernetes.io/rewrite-target: /$1
+#    nginx.ingress.kubernetes.io/canary-weight: "30"
 spec:
+  ingressClassName: nginx
+#  tls:
+#  - hosts:
+#    - gowebd.corpX.un
+#    secretName: gowebd-tls
   rules:
-    - host: webd.corp13.un
+  - host: webd.corpX.un
-      http:
+    http:
-        paths:
+      paths:
-          - path: /(.*)
+      - backend:
-            pathType: Prefix  # Попробовать: ImplementationSpecific
+          service:
-            backend:
+            name: my-webd
-              service:
+            port:
-                name: my-webd
+              number: 4080
-                port:
+        path: /
-                  number: 80
+        pathType: Prefix
+  - host: gowebd.corpX.un
+    http:
+      paths:
+      - backend:
+          service:
+            name: my-gowebd
+            port:
+              number: 80
+        path: /
+        pathType: Prefix
 </code><code>
-$ kubectl apply -f my-webd-ingress.yaml
+node1# kubectl apply -f my-ingress.yaml -n my-ns
-$ kubectl get ingress -n my-ns
+node1# kubectl get ingress -n my-ns
+NAME      CLASS   HOSTS                             ADDRESS                         PORTS   AGE
+my-webd   nginx   webd.corpX.un,gowebd.corpX.un   192.168.X.202,192.168.X.203   80      14m
+</code>
+  * [[Утилита curl]]
+<code>
+$ curl webd.corpX.un
+$ curl gowebd.corpX.un
+$ curl https://gowebd.corpX.un #-kv
-root@gate.corp13.un:~# host webd
+$ curl http://nodeN/ -H "Host: webd.corpX.un"
-webd.corp13.un is an alias for node2.corp13.un.
+$ curl --connect-to "":"":kubeN:443 https://gowebd.corpX.un #-vk
-node2.corp13.un has address 192.168.13.220
-$ curl webd.corp13.un
+$ kubectl logs -n ingress-nginx -l app.kubernetes.io/name=ingress-nginx -f
-$ kubectl logs -l app=my-webd -n my-ns
+node1# ### kubectl delete ingress my-ingress -n my-ns
 </code>
-==== Удаление объектов ====
+=== secrets tls ===
+  * [[https://devopscube.com/configure-ingress-tls-kubernetes/|How To Configure Ingress TLS/SSL Certificates in Kubernetes]]
 <code>
-$ kubectl delete -n my-ns -f my-webd-deployment.yaml,my-webd-service.yaml,my-webd-ingress.yaml
+$ kubectl create secret tls gowebd-tls --key gowebd.key --cert gowebd.crt -n my-ns
+$ kubectl get secrets -n my-ns
-или
+$ kubectl get secret/gowebd-tls -o yaml -n my-ns
-$ kubectl delete namespace my-ns
+$ ###kubectl delete secret/gowebd-tls -n my-ns
 </code>
-==== Пример с nfs volume ====
+==== Volumes ====
-  * [[https://matthewpalmer.net/kubernetes-app-developer/articles/kubernetes-volumes-example-nfs-persistent-volume.html|How to use an NFS volume]]
+=== hostPath и nodeSelector ===
+  * [[Средства программирования shell#Ресурсы Web сервера на shell]] на kube3
 <code>
-$ cat my-webd-nfs-deployment.yaml
+kube1# kubectl label nodes kube3 htdocs-node=yes
+kube1# kubectl get nodes --show-labels
+kube1:~/pywebd-k8s# cat my-webd-deployment.yaml
+</code><code>
 ...
-    spec:
+        volumeMounts:
+        - name: htdocs-volume
+          mountPath: /usr/local/apache2/htdocs
+#        lifecycle:
+#        ...
+      volumes:
+      - name: htdocs-volume
+        hostPath:
+          path: /var/www/
+      nodeSelector:
+        htdocs-node: "yes"
+#      initContainers:
+#      ...
+</code>
+=== PersistentVolume и PersistentVolumeClaim ===
+  * [[https://qna.habr.com/q/629022|Несколько Claim на один Persistent Volumes?]]
+  * [[https://serveradmin.ru/hranilishha-dannyh-persistent-volumes-v-kubernetes/|Хранилища данных (Persistent Volumes) в Kubernetes]]
+  * [[https://stackoverflow.com/questions/59915899/limit-persistent-volume-claim-content-folder-size-using-hostpath|Limit persistent volume claim content folder size using hostPath]]
+  * [[https://stackoverflow.com/questions/63490278/kubernetes-persistent-volume-hostpath-vs-local-and-data-persistence|Kubernetes persistent volume: hostpath vs local and data persistence]]
+  * [[https://www.alibabacloud.com/blog/kubernetes-volume-basics-emptydir-and-persistentvolume_594834|Kubernetes Volume Basics: emptyDir and PersistentVolume]]
+<code>
+kube1:~/pv# cat my-ha-pv.yaml
+</code><code>
+apiVersion: v1
+kind: PersistentVolume
+metadata:
+  name: my-pv-kube3-sz-128m-num-001
+#  name: my-pv-kube3-keycloak
+#  labels:
+#    type: local
+spec:
+## comment storageClassName for keycloak
+  storageClassName: my-ha-sc
+  capacity:
+    storage: 128Mi
+#    storage: 8Gi
+  accessModes:
+    - ReadWriteOnce
+  hostPath:
+#    path: /disk2
+    path: /disk2/dir1
+  persistentVolumeReclaimPolicy: Retain
+  nodeAffinity:
+    required:
+      nodeSelectorTerms:
+      - matchExpressions:
+        - key: kubernetes.io/hostname
+          operator: In
+          values:
+          - kube3
+---
+#...
+</code><code>
+kube1:~/pv# kubectl apply -f my-ha-pv.yaml
+kube1# kubectl get pv
+kube1# kubectl delete pv my-pv-kube3-sz-128m-num-001
+kube3# mkdir -p /disk2/dir{0..3}
+kube3# chmod 777 -R /disk2/
+kube3# find /disk2/
+kube3# ###rm -rf /disk2/
+</code>
+  * [[https://stackoverflow.com/questions/55639436/create-multiple-persistent-volumes-in-one-yaml]]
+  * Знакомимся с [[#Helm]]
+<code>
+kube1:~/pv# cat my-ha-pv-chart/Chart.yaml
+</code><code>
+apiVersion: v2
+name: my-ha-pv-chart
+version: 0.1.0
+</code><code>
+kube1:~/pv# cat my-ha-pv-chart/values.yaml
+</code><code>
+volume_names:
+- "dir1"
+- "dir2"
+- "dir3"
+numVolumes: "3"
+</code><code>
+kube1:~/pv# cat my-ha-pv-chart/templates/my-ha-pv.yaml
+</code><code>
+{{ range .Values.volume_names }}
+{{/* range $k, $v := until (atoi .Values.numVolumes) */}}
+---
+apiVersion: v1
+kind: PersistentVolume
+metadata:
+  name: my-pv-sz-128m-num-{{ . }}
+spec:
+  storageClassName: my-ha-sc
+  capacity:
+    storage: 128Mi
+  accessModes:
+    - ReadWriteOnce
+  hostPath:
+    path: /disk2/{{ . }}/
+{{/*    path: /disk2/dir{{ $v }}/ */}}
+  persistentVolumeReclaimPolicy: Retain
+  nodeAffinity:
+    required:
+      nodeSelectorTerms:
+      - matchExpressions:
+        - key: kubernetes.io/hostname
+          operator: In
+          values:
+          - kube3
+{{ end }}
+</code><code>
+kube1:~/pv# helm template my-ha-pv-chart my-ha-pv-chart/
+kube1:~/pv# helm install my-ha-pv-chart my-ha-pv-chart/
+kube1# kubectl get pv
+kube1:~/pv# ###helm uninstall my-ha-pv-chart
+</code><code>
+kube1:~/pywebd-k8s# cat my-webd-pvc.yaml
+</code><code>
+apiVersion: v1
+kind: PersistentVolumeClaim
+metadata:
+  name: my-webd-pvc
+spec:
+  storageClassName: my-ha-sc
+  accessModes:
+    - ReadWriteOnce
+  resources:
+    requests:
+      storage: 64Mi
+</code><code>
+kube1:~/pywebd-k8s# kubectl apply -f my-webd-pvc.yaml -n my-ns
+kube1:~/pywebd-k8s# kubectl get pvc -n my-ns
+kube1:~/pywebd-k8s# cat my-webd-deployment.yaml
+</code><code>
+...
+        volumeMounts:
+        - name: htdocs-volume
+          mountPath: /usr/local/apache2/htdocs
+        lifecycle:
+        ...
+      volumes:
+      - name: htdocs-volume
+        persistentVolumeClaim:
+          claimName: my-webd-pvc
+      initContainers:
+      ...
+</code><code>
+kube3# find /disk2
+</code>
+=== Dynamic Volume Provisioning ===
+  * [[https://kubernetes.io/docs/concepts/storage/dynamic-provisioning/|Dynamic Volume Provisioning]]
+  * [[https://kubernetes.io/docs/tasks/administer-cluster/change-default-storage-class/|Changing the default StorageClass]]
+=== rancher local-path-provisioner ===
+  * [[https://github.com/rancher/local-path-provisioner|rancher local-path-provisioner]]
+  * [[https://artifacthub.io/packages/helm/ebrianne/local-path-provisioner|This chart bootstraps a  deployment on a  cluster using the  package manager]]
+<code>
+$ kubectl apply -f https://raw.githubusercontent.com/rancher/local-path-provisioner/v0.0.26/deploy/local-path-storage.yaml
+$ kubectl get sc
+$ kubectl -n local-path-storage get all
+$ curl https://raw.githubusercontent.com/rancher/local-path-provisioner/v0.0.26/deploy/local-path-storage.yaml | less
+/DEFAULT_PATH_FOR_NON_LISTED_NODES
+ssh root@kube1 'mkdir /opt/local-path-provisioner'
+ssh root@kube2 'mkdir /opt/local-path-provisioner'
+ssh root@kube3 'mkdir /opt/local-path-provisioner'
+ssh root@kube1 'chmod 777 /opt/local-path-provisioner'
+ssh root@kube2 'chmod 777 /opt/local-path-provisioner'
+ssh root@kube3 'chmod 777 /opt/local-path-provisioner'
+$ ###kubectl patch storageclass local-path -p '{"metadata": {"annotations":{"storageclass.kubernetes.io/is-default-class":"true"}}}'
+</code>
+  * Сервис Keycloak в [[Сервис Keycloak#Kubernetes]]
+<code>
+$ kubectl get pvc -n my-keycloak-ns
+$ kubectl get pv
+$ ###kubectl -n my-keycloak-ns delete pvc data-my-keycloak-postgresql-0
+</code>
+=== longhorn ===
+<code>
+kubeN:~# apt install open-iscsi
+(venv1) server:~# ansible all -f 4 -m apt -a 'pkg=open-iscsi state=present update_cache=true' -i /root/kubespray/inventory/mycluster/hosts.yaml
+</code>
+  * [[https://github.com/longhorn/longhorn]]
+<code>
+$ kubectl apply -f https://raw.githubusercontent.com/longhorn/longhorn/v1.6.0/deploy/longhorn.yaml
+$ kubectl -n longhorn-system get pods -o wide --watch
+Setting->General
+Pod Deletion Policy When Node is Down: delete-statefuset-pod
+</code>
+Подключение через kubectl proxy
+  * [[https://stackoverflow.com/questions/45172008/how-do-i-access-this-kubernetes-service-via-kubectl-proxy|How do I access this Kubernetes service via kubectl proxy?]]
+<code>
+cmder> kubectl proxy
+</code>
+  * http://localhost:8001/api/v1/namespaces/longhorn-system/services/longhorn-frontend:80/proxy/
+Подключение через ingress
+!!! Добавить пример с аутентификацией !!!
+<code>
+student@server:~/longhorn$ cat ingress.yaml
+apiVersion: networking.k8s.io/v1
+kind: Ingress
+metadata:
+  name: longhorn-ingress
+  namespace: longhorn-system
+spec:
+  ingressClassName: nginx
+  rules:
+  - host: lh.corp13.un
+    http:
+      paths:
+      - backend:
+          service:
+            name: longhorn-frontend
+            port:
+              number: 80
+        path: /
+        pathType: Prefix
+</code>
+== Использование snapshot-ов ==
+  * [[https://github.com/longhorn/longhorn/issues/63?ref=https%3A%2F%2Fgiter.vip|What should be the best procedure to recover a snapshot or a backup in rancher2/longhorn ?]]
+  * Делаем снапшот
+  * Что-то ломаем (удаляем пользователя)
+  * Останавливаем сервис
+<code>
+kube1:~# kubectl -n my-keycloak-ns scale --replicas 0 statefulset my-keycloak
+kube1:~# kubectl -n my-keycloak-ns scale --replicas 0 statefulset my-keycloak-postgresql
+</code>
+  * Volume -> Attache to Host (любой) в режиме Maintenance, Revert к снапшоту, Deattache
+  * Запускаем сервис
+<code>
+kube1:~# kubectl -n my-keycloak-ns scale --replicas 1 statefulset my-keycloak-postgresql
+kube1:~# kubectl -n my-keycloak-ns scale --replicas 2 statefulset my-keycloak
+</code>
+== Использование backup-ов ==
+  * Разворачиваем [[Сервис NFS]] на server
+<code>
+Setting -> General -> Backup Target -> nfs://server.corp13.un:/var/www (nfs client linux не нужен)
+</code>
+  * Volume -> Create Backup, удаляем NS, восстанавливаем Volume из бекапа, создаем NS и создаем для Volume PV/PVC как было, устанавливаем чарт, он подхватывает pv/pvc
+==== ConfigMap, Secret ====
+<code>
+server# scp /etc/pywebd/* kube1:/tmp/
+kube1:~/pywebd-k8s# kubectl create configmap pywebd-conf --from-file=/tmp/pywebd.conf --dry-run=client -o yaml | tee my-webd-configmap.yaml
+kube1:~/pywebd-k8s# cat my-webd-configmap.yaml
+</code><code>
+apiVersion: v1
+data:
+  pywebd.conf: |
+    [default]
+    DocumentRoot = /usr/local/apache2/htdocs
+    Listen = 4443
+kind: ConfigMap
+metadata:
+  creationTimestamp: null
+  name: pywebd-conf
+</code><code>
+kube1:~/pywebd-k8s# kubectl apply -f my-webd-configmap.yaml -n my-ns
+kube1:~/pywebd-k8s# kubectl -n my-ns get configmaps
+kube1:~/pywebd-k8s# kubectl create secret tls pywebd-tls --key /tmp/pywebd.key --cert /tmp/pywebd.crt --dry-run=client -o yaml | tee my-webd-secret-tls.yaml
+kube1:~/pywebd-k8s# less my-webd-secret-tls.yaml
+</code><code>
+apiVersion: v1
+data:
+  tls.crt: ...
+  tls.key: ...
+kind: Secret
+metadata:
+  creationTimestamp: null
+  name: pywebd-tls
+type: kubernetes.io/tls
+</code><code>
+kube1:~/pywebd-k8s# rm -rv /tmp/pywebd.*
+kube1:~/pywebd-k8s# kubectl apply -f my-webd-secret-tls.yaml -n my-ns
+kube1:~/pywebd-k8s# kubectl -n my-ns get secrets
+kube1:~/pywebd-k8s#  kubectl create secret docker-registry regcred --docker-server=server.corpX.un:5000 --docker-username=student --docker-password='strongpassword' -n my-ns
+kube1:~/pywebd-k8s# cat my-webd-deployment.yaml
+</code><code>
+...
+      imagePullSecrets:
+      - name: regcred
       containers:
       - name: my-webd
-        image: server.corp13.un:5000/student/webd:latest
+        image: server.corpX.un:5000/student/pywebd:ver1.2
+        imagePullPolicy: "Always"
+#        env:
+#          ...
+...
+        livenessProbe:
+          httpGet:
+            port: 4443
+            scheme: HTTPS
+...
         volumeMounts:
-        - name: nfs-volume
+...
-          mountPath: /var/www
+        - name: conf-volume
+          subPath: pywebd.conf
+          mountPath: /etc/pywebd/pywebd.conf
+        - name: secret-tls-volume
+          subPath: tls.crt
+          mountPath: /etc/pywebd/pywebd.crt
+        - name: secret-tls-volume
+          subPath: tls.key
+          mountPath: /etc/pywebd/pywebd.key
+...
       volumes:
-      - name: nfs-volume
+...
-        nfs:
+      - name: conf-volume
-          server: 192.168.13.1
+        configMap:
-          path: /var/www
+          name: pywebd-conf
+      - name: secret-tls-volume
+        secret:
+          secretName: pywebd-tls
+...
+</code><code>
+kubeN$ curl --connect-to "":"":<POD_IP>:4443 https://pywebd.corpX.un
 </code>
+==== ConfigMap ====
+  * [[https://www.aquasec.com/cloud-native-academy/kubernetes-101/kubernetes-configmap/|Kubernetes ConfigMap: Creating, Viewing, Consuming & Managing]]
+  * [[https://blog.lapw.at/how-to-enable-ssh-into-a-kubernetes-pod/|How to enable SSH connections into a Kubernetes pod]]
+<code>
+root@node1:~# cat sshd_config
+</code><code>
+PermitRootLogin yes
+PasswordAuthentication no
+ChallengeResponseAuthentication no
+UsePAM no
+</code><code>
+root@node1:~# kubectl create configmap ssh-config --from-file=sshd_config --dry-run=client -o yaml
+...
+server:~# cat .ssh/id_rsa.pub
+...
+root@node1:~# cat my-openssh-server-deployment.yaml
+</code><code>
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: ssh-config
+data:
+  sshd_config: |
+    PermitRootLogin yes
+    PasswordAuthentication no
+    ChallengeResponseAuthentication no
+    UsePAM no
+  authorized_keys: |
+    ssh-rsa AAAAB.....C0zOcZ68= root@server.corpX.un
+---
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: my-openssh-server
+spec:
+  selector:
+    matchLabels:
+      app: my-openssh-server
+  template:
+    metadata:
+      labels:
+        app: my-openssh-server
+    spec:
+      containers:
+      - name: my-openssh-server
+        image: linuxserver/openssh-server
+        command: ["/bin/sh"]
+        args: ["-c", "/usr/bin/ssh-keygen -A; usermod -p '*' root; /usr/sbin/sshd.pam -D"]
+        ports:
+        - containerPort: 22
+        volumeMounts:
+        - name: ssh-volume
+          subPath: sshd_config
+          mountPath: /etc/ssh/sshd_config
+        - name: ssh-volume
+          subPath: authorized_keys
+          mountPath: /root/.ssh/authorized_keys
+      volumes:
+      - name: ssh-volume
+        configMap:
+          name: ssh-config
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: my-openssh-server
+spec:
+  type: NodePort
+  ports:
+  - port: 22
+    nodePort: 32222
+  selector:
+    app: my-openssh-server
+</code><code>
+root@node1:~# kubectl apply -f my-openssh-server-deployment.yaml
+root@node1:~# iptables-save | grep 32222
+root@node1:~# ###kubectl exec -ti my-openssh-server-NNNNNNNN-NNNNN -- bash
+server:~# ssh -p 32222 nodeN
+Welcome to OpenSSH Server
+my-openssh-server-NNNNNNNN-NNNNN:~# nslookup my-openssh-server.default.svc.cluster.local
+</code>
 ==== Пример с multi container pod ====
@@ Line 336: / Line 1631: @@
       containers:
       - name: my-webd
-        image: server.corp13.un:5000/student/webd:latest
+        image: server.corpX.un:5000/student/webd:latest
         volumeMounts:
         - name: html
@@ Line 382: / Line 1677: @@
-==== Установка ====
+==== Установка Helm ====
   * [[https://helm.sh/docs/intro/install/|Installing Helm]]
+  * [[https://github.com/helm/helm/releases|helm releases]]
 <code>
-$ wget https://get.helm.sh/helm-v3.9.0-linux-amd64.tar.gz
+# wget https://get.helm.sh/helm-v3.16.4-linux-amd64.tar.gz
-$ tar -zxvf helm-v3.9.0-linux-amd64.tar.gz
+# tar -zxvf helm-*-linux-amd64.tar.gz
-$ sudo mv linux-amd64/helm /usr/local/bin/helm
+# mv linux-amd64/helm /usr/local/bin/helm
+$ cat ~/.profile
+</code><code>
+...
+source <(helm completion bash)
 </code>
+==== Работа с готовыми Charts ====
+  * Сервис Keycloak [[Сервис Keycloak#Kubernetes]]
+=== ingress-nginx ===
+  * [[https://kubernetes.github.io/ingress-nginx/deploy/|NGINX Ingress Controller Installation Guide]]
+  * [[https://stackoverflow.com/questions/56915354/how-to-install-nginx-ingress-with-hostnetwork-on-bare-metal|stackoverflow How to install nginx-ingress with hostNetwork on bare-metal?]]
+  * [[https://devpress.csdn.net/cloud/62fc8e7e7e66823466190055.html|devpress.csdn.net How to install nginx-ingress with hostNetwork on bare-metal?]]
+  * [[https://github.com/kubernetes/ingress-nginx/blob/main/charts/ingress-nginx/values.yaml]]
+  * [[https://github.com/kubernetes/ingress-nginx]] --version 4.7.3
+<code>
+$ helm upgrade ingress-nginx --install ingress-nginx \
+--set controller.hostNetwork=true,controller.publishService.enabled=false,controller.kind=DaemonSet,controller.config.use-forwarded-headers=true \
+--repo https://kubernetes.github.io/ingress-nginx --namespace ingress-nginx --create-namespace
+$ helm list --namespace ingress-nginx
+$ helm list -A
+$ kubectl get all -n ingress-nginx -o wide
+$ helm delete ingress-nginx --namespace ingress-nginx
+$ mkdir -p ingress-nginx; cd ingress-nginx
+$ helm template ingress-nginx --repo https://kubernetes.github.io/ingress-nginx --namespace ingress-nginx | tee t1.yaml
+$ helm show values ingress-nginx --repo https://kubernetes.github.io/ingress-nginx | tee values.yaml.orig
+$ cat values.yaml
+</code><code>
+controller:
+  hostNetwork: true
+  publishService:
+    enabled: false
+  kind: DaemonSet
+#  config:
+#    use-forwarded-headers: true
+#    allow-snippet-annotations: true
+</code><code>
+$ helm template ingress-nginx -f values.yaml --repo https://kubernetes.github.io/ingress-nginx -n ingress-nginx | tee t2.yaml
+$ helm upgrade ingress-nginx -i ingress-nginx -f values.yaml --repo https://kubernetes.github.io/ingress-nginx -n ingress-nginx --create-namespace
+$ kubectl exec -n ingress-nginx pods/ingress-nginx-controller-<TAB> -- cat /etc/nginx/nginx.conf | tee nginx.conf | grep use_forwarded_headers
+$ kubectl -n ingress-nginx describe service/ingress-nginx-controller
+...
+Endpoints:                192.168.X.221:80,192.168.X.222:80,192.168.X.223:80
+...
+# kubectl get clusterrole -A | grep -i ingress
+# kubectl get clusterrolebindings -A | grep -i ingress
+# kubectl get validatingwebhookconfigurations -A | grep -i ingress
+# ###helm uninstall ingress-nginx -n ingress-nginx
+</code>
 ==== Развертывание своего приложения ====
+  * [[https://helm.sh/docs/chart_template_guide/getting_started/|chart_template_guide getting_started]]
   * [[https://opensource.com/article/20/5/helm-charts|How to make a Helm chart in 10 minutes]]
   * [[https://stackoverflow.com/questions/49812830/helm-upgrade-with-same-chart-version-but-different-docker-image-tag|Helm upgrade with same chart version, but different Docker image tag]]
+  * [[https://stackoverflow.com/questions/69817305/how-set-field-app-version-in-helm3-chart|how set field app-version in helm3 chart?]]
 <code>
-$ helm create webd-chart
+~/gowebd-k8s$ helm create webd-chart
+$ less webd-chart/templates/deployment.yaml
 $ cat webd-chart/Chart.yaml
@@ Line 408: / Line 1773: @@
 ...
 version: 0.1.1
+icon: https://val.bmstu.ru/unix/Media/logo.gif
 ...
 appVersion: "latest"
+#appVersion: ver1.7   #for vanilla argocd
 </code><code>
 $ cat webd-chart/values.yaml
 </code><code>
 ...
+replicaCount: 2
 image:
-  repository: server.corp13.un:5000/student/webd
+  repository: server.corpX.un:5000/student/webd
   pullPolicy: Always
 ...
@@ Line 422: / Line 1791: @@
 ...
 service:
-  type: NodePort
+#  type: NodePort
 ...
 ingress:
   enabled: true
+  className: "nginx"
 ...
   hosts:
-    - host: webd.corp13.un
+    - host: webd.corpX.un
 ...
+#  tls: []
+#  tls:
+#    - secretName: gowebd-tls
+#      hosts:
+#        - gowebd.corpX.un
+...
+#APWEBD_HOSTNAME: "apwebd.corp13.un"
+#KEYCLOAK_HOSTNAME: "keycloak.corp13.un"
+#REALM_NAME: "corp13"
 </code><code>
 $ less webd-chart/templates/deployment.yaml
 </code><code>
 ...
-          image: "{{ .Values.image.repository }}:{{ .Values.image.tag | default .Chart.AppVersion }}"
+          imagePullPolicy: {{ .Values.image.pullPolicy }}
+#          env:
+#          - name: APWEBD_HOSTNAME
+#            value: "{{ .Values.APWEBD_HOSTNAME }}"
+#          - name: KEYCLOAK_HOSTNAME
+#            value: "{{ .Values.KEYCLOAK_HOSTNAME }}"
+#          - name: REALM_NAME
+#            value: "{{ .Values.REALM_NAME }}"
 ...
 </code><code>
-!!! Был замечен "глюк" DNS, из-за которого не загружался Docker образ, "лечился" предварительным созданием namespace
+$ helm lint webd-chart/
-$ helm install my-webd webd-chart/ --n my-ns --create-namespace --wait
+$ helm template my-webd webd-chart/ | less
+$ helm install my-webd webd-chart/ -n my-ns --create-namespace --wait
+$ curl kubeN -H "Host: gowebd.corpX.un"
+$ kubectl describe events -n my-ns | less
 $ export HELM_NAMESPACE=my-ns
@@ Line 445: / Line 1837: @@
 $ helm list
-$ helm upgrade my-webd webd-chart/ --set=image.tag=ver1.10
+$ ### helm upgrade my-webd webd-chart/ --set=image.tag=ver1.10
 $ helm history my-webd
@@ Line 460: / Line 1852: @@
   * [[https://medium.com/containerum/how-to-make-and-share-your-own-helm-package-50ae40f6c221|How to make and share your own Helm package]]
   * [[https://docs.gitlab.com/ee/user/profile/personal_access_tokens.html|Gitlab Personal access tokens]]
+  * [[Инструмент GitLab#Подключение через API]] - Role: Mainteiner, api (read_registry, write_registry не нужно)
+=== Добавляем приложение в свой репозиторий ===
 <code>
-$ helm repo add --username student --password NNNNNN-NNNNNNNNNNNNN webd http://192.168.13.1/api/v4/projects/6/packages/helm/stable
+~/gowebd-k8s$ helm repo add --username student --password NNNNN-NNNNNNNNNNNNNNNNNNN webd https://server.corpX.un/api/v4/projects/N/packages/helm/stable
+"webd" has been added to your repositories
-$ helm repo list
+~/gowebd-k8s$ helm repo list
-$ helm package webd-chart
+~/gowebd-k8s$ helm package webd-chart
-$ ls *tgz
-$ helm plugin install https://github.com/chartmuseum/helm-push
+~/gowebd-k8s$ tar -tf webd-chart-0.1.1.tgz
-$ helm cm-push webd-chart-0.1.0.tgz webd
-... С другого кластера подключаем (аналогично) наш репозиторий и ...
+~/gowebd-k8s$ helm plugin install https://github.com/chartmuseum/helm-push
-$ helm search repo webd
+~/gowebd-k8s$ helm cm-push webd-chart-0.1.1.tgz webd
-$ helm repo update webd
+~/gowebd-k8s$ rm webd-chart-0.1.1.tgz
-$ helm install my-webd webd/webd-chart
+~/gowebd-k8s$ ### helm repo remove webd
+~/gowebd-k8s$ ### helm plugin uninstall cm-push
+</code>
+=== Устанавливаем приложение через подключение репозитория ===
+<code>
+kube1:~# helm repo add webd https://server.corpX.un/api/v4/projects/N/packages/helm/stable
+kube1:~# helm repo update
+kube1:~# helm search repo webd
+kube1:~# helm repo update webd
+kube1:~# helm show values webd/webd-chart | tee values.yaml.orig
+kube1:~# ###helm pull webd/webd-chart
+kube1:~# helm install my-webd webd/webd-chart
+kube1:~# ###helm uninstall my-webd
+kube1:~# ###helm repo remove webd
+</code>
+=== Устанавливаем приложение без подключение репозитория ===
+<code>
+kube1:~# mkdir gowebd; cd gowebd
+kube1:~/gowebd# ###helm pull webd-chart --repo https://server.corpX.un/api/v4/projects/N/packages/helm/stable
+kube1:~/gowebd# helm show values webd-chart --repo https://server.corpX.un/api/v4/projects/N/packages/helm/stable | tee values.yaml.orig
+kube1:~/gowebd# cat values.yaml
+</code><code>
+replicaCount: 3
+image:
+  tag: "ver1.1"
+#REALM_NAME: "corp"
+</code><code>
+kube1:~/gowebd# helm upgrade my-webd -i webd-chart -f values.yaml -n my-ns --create-namespace --repo https://server.corpX.un/api/v4/projects/N/packages/helm/stable
+$ curl http://kubeN -H "Host: gowebd.corpX.un"
+kube1:~/gowebd# ###helm uninstall my-webd -n my-ns
 </code>
 ==== Работа с публичными репозиториями ====
+=== gitlab-runner kubernetes ===
 <code>
-$ helm search hub -o json wordpress | jq '.' | less
+kube1:~/gitlab-runner# kubectl create ns gitlab-runner
-$ helm repo add bitnami https://charts.bitnami.com/bitnami
+kube1:~/gitlab-runner# kubectl -n gitlab-runner create configmap ca-crt --from-file=/usr/local/share/ca-certificates/ca.crt
-$ helm show values bitnami/wordpress
+kube1:~/gitlab-runner# helm repo add gitlab https://charts.gitlab.io
+kube1:~/gitlab-runner# helm repo list
+kube1:~/gitlab-runner# helm search repo -l gitlab
+kube1:~/gitlab-runner# helm search repo -l gitlab/gitlab-runner
+kube1:~/gitlab-runner# helm show values gitlab/gitlab-runner --version 0.70.5 | tee values.yaml
+kube1:~/gitlab-runner# cat values.yaml
+</code><code>
+...
+gitlabUrl: https://server.corpX.un
+...
+runnerToken: "NNNNNNNNNNNNNNNNNNNNN"
+...
+rbac:
+...
+  create: true                      #change this
+...
+serviceAccount:
+...
+  create: true                      #change this
+...
+runners:
+...
+  config: |
+    [[runners]]
+      tls-ca-file = "/mnt/ca.crt"   #insert this
+      [runners.kubernetes]
+        namespace = "{{.Release.Namespace}}"
+        image = "alpine"
+        privileged = true           #insert this
+...
+securityContext:
+  allowPrivilegeEscalation: true    #change this
+  readOnlyRootFilesystem: false
+  runAsNonRoot: true
+  privileged: true                  #change this
+...
+#volumeMounts: []                   #comment this
+volumeMounts:
+  - name: ca-crt
+    subPath: ca.crt
+    mountPath: /mnt/ca.crt
+...
+#volumes: []                        #comment this
+volumes:
+  - name: ca-crt
+    configMap:
+      name: ca-crt
+...
+</code><code>
+kube1:~/gitlab-runner# helm upgrade -i gitlab-runner gitlab/gitlab-runner -f values.yaml -n gitlab-runner --version 0.70.5
+kube1:~/gitlab-runner# kubectl get all -n gitlab-runner
+kube1:~/gitlab-runner# ### helm -n gitlab-runner uninstall gitlab-runner
 </code>
+== старая версия ==
+<code>
+gitlab-runner@server:~$ helm repo add gitlab https://charts.gitlab.io
+gitlab-runner@server:~$ helm repo list
+gitlab-runner@server:~$ helm search repo -l gitlab
+gitlab-runner@server:~$ helm search repo -l gitlab/gitlab-runner
+gitlab-runner@server:~$ helm show values gitlab/gitlab-runner --version 0.56.0 | tee values.yaml
+gitlab-runner@server:~$ diff values.yaml values.yaml.orig
+</code><code>
+...
+gitlabUrl: http://server.corpX.un/
+...
+runnerRegistrationToken: "NNNNNNNNNNNNNNNNNNNNNNNN"
+...
+,149c142
+<   create: true
+---
+>   create: false
+d317
+<         privileged = true
+c424
+<   allowPrivilegeEscalation: true
+---
+>   allowPrivilegeEscalation: false
+c427
+<   privileged: true
+---
+>   privileged: false
+</code><code>
+gitlab-runner@server:~$ helm upgrade -i gitlab-runner gitlab/gitlab-runner -f values.yaml -n gitlab-runner --create-namespace --version 0.56.0
+gitlab-runner@server:~$ kubectl get all -n gitlab-runner
+</code>
+== SSL/TLS ==
+<code>
+# kubectl -n gitlab-runner create configmap wild-crt --from-file=wild.crt
+# cat values.yaml
+</code><code>
+...
+gitlabUrl: https://server.corpX.un/
+...
+  config: |
+    [[runners]]
+      tls-ca-file = "/mnt/wild.crt"
+      [runners.kubernetes]
+...
+#volumeMounts: []
+volumeMounts:
+  - name: wild-crt
+    subPath: wild.crt
+    mountPath: /mnt/wild.crt
+#volumes: []
+volumes:
+  - name: wild-crt
+    configMap:
+      name: wild-crt
+</code>
+===== Kubernetes Dashboard =====
+  * https://kubernetes.io/docs/tasks/access-application-cluster/web-ui-dashboard/
+  * https://github.com/kubernetes/dashboard/blob/master/docs/user/access-control/creating-sample-user.md
+<code>
+$ kubectl apply -f https://raw.githubusercontent.com/kubernetes/dashboard/v2.7.0/aio/deploy/recommended.yaml
+$ cat dashboard-user-role.yaml
+</code><code>
+---
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  name: admin-user
+  namespace: kubernetes-dashboard
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: ClusterRoleBinding
+metadata:
+  name: admin-user
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: ClusterRole
+  name: cluster-admin
+subjects:
+- kind: ServiceAccount
+  name: admin-user
+  namespace: kubernetes-dashboard
+---
+apiVersion: v1
+kind: Secret
+metadata:
+  name: admin-user
+  namespace: kubernetes-dashboard
+  annotations:
+    kubernetes.io/service-account.name: "admin-user"
+type: kubernetes.io/service-account-token
+</code><code>
+$ kubectl apply -f dashboard-user-role.yaml
+$ kubectl -n kubernetes-dashboard create token admin-user
+$ kubectl get secret admin-user -n kubernetes-dashboard -o jsonpath={".data.token"} | base64 -d ; echo
+cmder$ kubectl proxy
+</code>
+  * http://localhost:8001/api/v1/namespaces/kubernetes-dashboard/services/https:kubernetes-dashboard:/proxy/
+===== Мониторинг =====
+==== Metrics Server ====
+  * [[https://kubernetes-sigs.github.io/metrics-server/Kubernetes Metrics Server]]
+  * [[https://medium.com/@cloudspinx/fix-error-metrics-api-not-available-in-kubernetes-aa10766e1c2f|Fix “error: Metrics API not available” in Kubernetes]]
+<code>
+kube1:~/metrics-server# curl -L https://github.com/kubernetes-sigs/metrics-server/releases/download/v0.7.2/components.yaml | tee metrics-server-components.yaml
+kube1:~/metrics-server# cat metrics-server-components.yaml
+</code><code>
+...
+      containers:
+      - args:
+        - --cert-dir=/tmp
+        - --kubelet-insecure-tls   # add this
+...
+</code><code>
+kube1:~/metrics-server# kubectl apply -f metrics-server-components.yaml
+kube1# kubectl get pods -A | grep metrics-server
+kube1# kubectl top pod #-n kube-system
+kube1# kubectl top pod -A --sort-by=memory
+kube1# kubectl top node
+</code>
+==== kube-state-metrics ====
+  * [[https://github.com/prometheus-community/helm-charts/tree/main/charts/kube-state-metrics]]
+  * ... алерты с инфой по упавшим подам ...
+<code>
+kube1# helm repo add prometheus-community https://prometheus-community.github.io/helm-charts
+kube1# helm repo update
+kube1# helm install kube-state-metrics prometheus-community/kube-state-metrics -n vm --create-namespace
+kube1# curl kube-state-metrics.vm.svc.cluster.local:8080/metrics
+</code>
+===== Отладка, troubleshooting =====
+==== Отладка etcd ====
+  * [[https://sysdig.com/blog/monitor-etcd/|How to monitor etcd]]
+<code>
+kubeN:~# more /etc/kubernetes/manifests/kube-apiserver.yaml
+kubeN:~# etcdctl member list -w table \
+  --endpoints=https://kube1:2379 \
+  --cacert=/etc/ssl/etcd/ssl/ca.pem \
+  --cert=/etc/ssl/etcd/ssl/node-kube1.pem \
+  --key=/etc/ssl/etcd/ssl/node-kube1-key.pem
+kubeN:~# etcdctl endpoint status -w table \
+  --endpoints=https://kube1:2379,https://kube2:2379,https://kube3:2379 \
+  --cacert=/etc/ssl/etcd/ssl/ca.pem \
+  --cert=/etc/ssl/etcd/ssl/node-kube1.pem \
+  --key=/etc/ssl/etcd/ssl/node-kube1-key.pem
+</code>
 ===== Дополнительные материалы =====
+==== Настройка registry-mirrors для Kubespray ====
+<code>
+~/kubespray# cat inventory/mycluster/group_vars/all/docker.yml
+</code><code>
+...
+docker_registry_mirrors:
+  - https://mirror.gcr.io
+...
+</code><code>
+~/kubespray# cat inventory/mycluster/group_vars/all/containerd.yml
+</code><code>
+...
+containerd_registries_mirrors:
+  - prefix: docker.io
+    mirrors:
+    - host: https://mirror.gcr.io
+      capabilities: ["pull", "resolve"]
+      skip_verify: false
+...
+</code>
+==== Установка kubelet kubeadm kubectl в ubuntu20 ====
+  * На каждом узле нужно сделать
+<code>
+mkdir /etc/apt/keyrings
+curl -fsSL https://pkgs.k8s.io/core:/stable:/v1.28/deb/Release.key | sudo gpg --dearmor -o /etc/apt/keyrings/kubernetes-apt-keyring.gpg
+echo 'deb [signed-by=/etc/apt/keyrings/kubernetes-apt-keyring.gpg] https://pkgs.k8s.io/core:/stable:/v1.28/deb/ /' | sudo tee /etc/apt/sources.list.d/kubernetes.list
+apt update && apt install -y kubeadm=1.28.1-1.1 kubelet=1.28.1-1.1 kubectl=1.28.1-1.1
+</code>
+==== Use .kube/config Client certs in curl ====
+  * [[https://serverfault.com/questions/1094361/use-kube-config-client-certs-in-curl|Use .kube/config Client certs in curl]]
+<code>
+cat ~/.kube/config | yq -r '.clusters[0].cluster."certificate-authority-data"' | base64 -d - > ~/.kube/ca.pem
+cat ~/.kube/config | yq -r '.users[0].user."client-certificate-data"' | base64 -d - > ~/.kube/user.pem
+cat ~/.kube/config | yq -r '.users[0].user."client-key-data"' | base64 -d - > ~/.kube/user-key.pem
+SERVER_URL=$(cat ~/.kube/config | yq -r .clusters[0].cluster.server)
+curl --cacert ~/.kube/ca.pem --cert ~/.kube/user.pem --key ~/.kube/user-key.pem -X GET  ${SERVER_URL}/api/v1/namespaces/default/pods/
+</code>
+==== bare-metal minikube ====
+<code>
+student@node2:~$ sudo apt install conntrack
+https://computingforgeeks.com/install-mirantis-cri-dockerd-as-docker-engine-shim-for-kubernetes/
+...
+wget https://github.com/kubernetes-sigs/cri-tools/releases/download/v1.24.2/crictl-v1.24.2-linux-amd64.tar.gz
+...
+student@node2:~$ minikube start --driver=none --insecure-registry "server.corpX.un:5000"
+</code>
+==== minikube dashboard ====
+<code>
+student@node1:~$ minikube dashboard &
+...
+Opening http://127.0.0.1:NNNNN/api/v1/namespaces/kubernetes-dashboard/services/http:kubernetes-dashboard:/proxy/ in your default browser
+...
+/home/mobaxterm> ssh -L NNNNN:localhost:NNNNN student@192.168.X.10
+Теперь, та же ссылка работает на win host системе
+</code>
+==== Подключение к minikube с другой системы ====
+  * Если не minikube, то достаточно только копию .kube/config
+  * [[https://habr.com/ru/company/flant/blog/345580/|см. Настройка GitLab Runner]]
+<code>
+student@node1:~$ tar -cvzf kube-config.tar.gz .kube/config .minikube/ca.crt .minikube/profiles/minikube
+gitlab-runner@server:~$ scp student@node1:kube-config.tar.gz .
+gitlab-runner@server:~$ tar -xvf kube-config.tar.gz
+gitlab-runner@server:~$ cat .kube/config
+</code><code>
+...
+    certificate-authority: /home/gitlab-runner/.minikube/ca.crt
+...
+    client-certificate: /home/gitlab-runner/.minikube/profiles/minikube/client.crt
+    client-key: /home/gitlab-runner/.minikube/profiles/minikube/client.key
+...
+</code>
 ==== kompose ====
+  * [[https://stackoverflow.com/questions/47536536/whats-the-difference-between-docker-compose-and-kubernetes|What's the difference between Docker Compose and Kubernetes?]]
   * [[https://loft.sh/blog/docker-compose-to-kubernetes-step-by-step-migration/|Docker Compose to Kubernetes: Step-by-Step Migration]]
   * [[https://kubernetes.io/docs/tasks/configure-pod-container/translate-compose-kubernetes/|Translate a Docker Compose File to Kubernetes Resources]]
 <code>
-root@gate.corp13.un:~# curl -L https://github.com/kubernetes/kompose/releases/download/v1.26.0/kompose-linux-amd64 -o kompose
+root@gate:~# curl -L https://github.com/kubernetes/kompose/releases/download/v1.26.0/kompose-linux-amd64 -o kompose
-root@gate.corp13.un:~# chmod +x kompose
+root@gate:~# chmod +x kompose
-root@gate.corp13.un:~# sudo mv ./kompose /usr/local/bin/kompose
+root@gate:~# sudo mv ./kompose /usr/local/bin/kompose
 </code>

Методические материалы Лохтурова Вячеслава

User Tools

Site Tools

Differences

Page Tools