User Tools

Site Tools


сервис_qos

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
сервис_qos [2009/05/14 16:36]
val
сервис_qos [2018/09/12 14:50]
val [Назначение QOS для трафика отдельного порта]
Line 1: Line 1:
 ====== Сервис QOS ====== ====== Сервис QOS ======
 +
 +  * [[https://​habr.com/​post/​420525/​|Сети для самых матёрых. Часть пятнадцатая. QoS]]
 +===== Cisco =====
 +
 +  * [[https://​www.cisco.com/​c/​en/​us/​support/​docs/​switches/​catalyst-3750-series-switches/​91862-cat3750-qos-config.html|Cisco Catalyst 3750 QoS Configuration Examples]]
 +  * [[https://​reggle.wordpress.com/​2013/​05/​14/​qos-part-v-hardware-queues-on-35603750-switch-platform/​|QoS part V: hardware queues on 3560/3750 switch platform]]
 +  * [[http://​cisco-conf.ru/​qos/​90-qos-catalyst-3750-.html|3750 QOS: Общие принципы]]
 +
 +==== Включение ====
 +
 +<​code>​
 +mls qos
 +</​code>​
 +==== Назначение QOS для трафика c определенным DSCP  ====
 +
 +  * [[https://​dreamforccie.wordpress.com/​2010/​04/​23/​convert-phb-af-to-dscp-decimal-and-vise-versa-its-so-easy/​|Convert PHB AF to DSCP Decimal and Vise Versa: It’s So Easy!]]
 +  * [[https://​supportforums.cisco.com/​t5/​wan-routing-and-switching/​dscp-qos-value/​td-p/​920725|DSCP - QOS value]]
 +
 +<​code>​
 +TOS: 0x000068b8
 +
 +show mls qos maps dscp-output-q
 +
 +interface GigabitEthernet1/​0/​1
 + mls qos trust dscp
 +</​code>​
 +
 +==== Назначение DSCP для трафика c определенным профилем ====
 +
 +<​code>​
 +no ip access-list extended IP-Communicator
 +ip access-list extended IP-Communicator
 +! permit udp any any range 10000 20000
 +! permit ip any host 195.19.32.11
 + ​permit ip host 195.19.32.11 any
 +
 +class-map match-all Class-B
 + match access-group name IP-Communicator
 +
 +policy-map sample-policy2
 + class Class-B
 +  set dscp ef
 +
 +interface GigabitEthernet1/​0/​2
 + ​service-policy input sample-policy2
 +</​code>​
 +
 +==== Назначение QOS для трафика отдельного порта ====
 +
 +<​code>​
 +show mls qos maps cos-output-q
 +
 +interface GigabitEthernet1/​0/​11
 + mls qos cos 5
 + mls qos trust cos 
 +</​code>​
 +
 +==== Выделение полосы в магистральном соединении для трафика с определенным QOS ====
 +
 +<​code>​
 +sh mls qos queue-set
 +
 +show mls qos interface g1/0/47 queueing
 +
 +interface GigabitEthernet1/​0/​47
 +! Full priority for q1
 + ​srr-queue bandwidth shape 0 0 0 0
 + ​srr-queue bandwidth share 255 1 1 1
 +
 +! 1/20 band for q1
 + ​srr-queue bandwidth shape 20 0 0 0
 + ​srr-queue bandwidth share 1 1 1 1
 +
 +clear mls qos interface g1/0/47 statistics
 +show mls qos interface g1/0/47 statistics | inc queue
 +</​code>​
  
 ===== Равномерное ограничение полосы для всех с исключениями ===== ===== Равномерное ограничение полосы для всех с исключениями =====
Line 5: Line 81:
 ==== FreeBSD (ipfw) ==== ==== FreeBSD (ipfw) ====
 <​code>​ <​code>​
-[gX:~] # cat /​etc/​ipfw.conf +[gate:~] # cat /​etc/​ipfw.conf 
-pipe 1 config bw 64kbit/s mask dst-ip 0xffffffff +</​code><​code>​ 
-pipe 2 config bw 100mbit/s+pipe 1 config bw 100mbit/s 
 +pipe 2 config bw 64kbit/s mask dst-ip 0xffffffff
  
-add 10 pipe ip from any to 192.168.100+X.2 +add 10 pipe ip from any to 192.168.100+X.2 
-add 20 pipe ip from any to 192.168.100+X.0/​24+add 20 pipe ip from any to 192.168.100+X.0/​24
  
 add 100 allow ip from any to any add 100 allow ip from any to any
- +</​code><​code>​ 
-[gX:~] # cat /​etc/​rc.conf +[gate:~] # cat /​etc/​rc.conf 
-+</​code><​code>​ 
 +... 
 +dummynet_enable=yes
 firewall_enable="​YES"​ firewall_enable="​YES"​
 firewall_type="/​etc/​ipfw.conf"​ firewall_type="/​etc/​ipfw.conf"​
-+</​code><​code>​ 
 +[gate:~] # /​etc/​rc.d/​ipfw start
  
-[gX:~] # kldload dummynet +[gate:~] # ipfw pipe show
- +
-[gX:~] # /etc/rc.d/ipfw start+
 </​code>​ </​code>​
- 
 ===== Балансировка нагрузки между провайдерами ===== ===== Балансировка нагрузки между провайдерами =====
-Использование PF + 
 +==== FreeBSD (pf) ==== 
 http://​www.openbsd.org/​faq/​pf/​pools.html http://​www.openbsd.org/​faq/​pf/​pools.html
 <​code>​ <​code>​
-[gX:~] # cat /​etc/​pf.conf ​+[gate:~] # cat /​etc/​pf.conf 
 +</​code><​code>​
 lan_net = "​192.168.1X.0/​24"​ lan_net = "​192.168.1X.0/​24"​
 int_if ​ = "​tap0"​ int_if ​ = "​tap0"​
Line 52: Line 132:
    to any    to any
 </​code>​ </​code>​
- 
сервис_qos.txt · Last modified: 2020/05/07 07:37 by val