Differences

This shows you the differences between two versions of the page.

--- использование_протокола_802.1q [2022/03/26 06:37]
val [Настройка интерфейсов]
+++ использование_протокола_802.1q [2024/12/07 06:09] (current)
val [Настройка интерфейсов]
@@ Line 37: / Line 37: @@
 ==== Настройка интерфейсов ====
 <code>
-!!!switch1#
+!!!switch1_2#
 conf terminal
 interface FastEthernet0/1
-! desc linux server
+ desc linux server
-! switchport trunk encapsulation dot1q   ! для старых серий, в GNS3 не нужно
  switchport mode trunk
+! switchport trunk encapsulation dot1q   ! для старых серий, в GNS3 не нужно
 interface FastEthernet0/2
-! desc windows client1
+ desc windows client1
  switchport mode access
  switchport access vlan 2
 ! spanning-tree portfast
 ! ИЛИ
+interface FastEthernet0/2
+ desc uplink to switch3
+ switchport mode trunk
-!interface FastEthernet0/2
-! desc uplink to switch3
-! switchport mode trunk
 !!!switch3#
-!interface Port-channel1
+interface Port-channel1
-! desc uplink to CORE (switch1 and switch2)
+ desc uplink to CORE (switch1 and switch2)
-! switchport mode trunk
+ switchport mode trunk
-!interface FastEthernet0/2
+!interface range f0/2 - 4
-! desc windows client1
+interface FastEthernet0/2
-! switchport mode access
+ desc windows client1
-! switchport access vlan 2
+ switchport mode access
+ switchport access vlan 2
 </code>

Методические материалы Лохтурова Вячеслава