[gate:~] # cu -l cuad0

~. - отключиться
~# - послать сигнал break

# pkg_add -r minicom
или
# apt-get install minicom

# minicom -s

- Serial port setup (/dev/ttyS0 /dev/ttyUSB0 /dev/cuad0)
- Modem and dialing
- Save setup as dfl
- Exit from minicom

# minicom

Выход: <Ctrl>-a q Выход в меню: <Ctrl>-a z

line con 0
 exec-timeout 0 0

[gate:~] # pkg_add -r lrzsz

[gate:~] # cu -l cuad0

switch#copy xmodem: flash:
Destination filename []? test
Begin the Xmodem or Xmodem-1K transfer now...
~CLocal command? lsx .cshrc
Sending .cshrc, 6 blocks: Give your local XMODEM receive command now.
Bytes Sent:    896   BPS:677                             

Transfer complete

896 bytes copied in 13.453 secs (68 bytes/sec)

# minicom

switch#copy xmodem: flash:
Destination filename []? test

<Ctrl>-a s xmodem

gate# pkg_add -r conserver-com

gate# cat /usr/local/etc/conserver.cf
console switch {
        master localhost;
        rw *;
        type device;
        device /dev/cuad0;
        parity none; 
        baud 9600;
        logfile /var/log/switch.log;
}

console router {
       rw *;
       master localhost;
       type exec;
       exec telnet 192.168.X.2;
       logfile /var/log/router.log;
}

access * {
        trusted 127.0.0.1;
}

gate# console switch

<Ctrl>-e c .

gate# tail -f /var/log/switch.log

gate# apt-get install conserver-client
gate# apt-get install conserver-server

gate# cat /etc/conserver/conserver.cf

config * {
        sslrequired no;
}
console switch {
        rw *;
        master localhost;
        type exec;
        exec telnet 192.168.X.3;
#         type device;
#         device /dev/ttyS0;
#         baud 9600;
#         parity none;
        logfile /var/log/conserver/switch.log;
}

console router {
       rw *;
       master localhost;
       type exec;
       exec telnet 192.168.X.2;
       logfile /var/log/conserver/router.log;
}

access * {
        trusted 127.0.0.1;
}

gate# /etc/init.d/conserver-server restart

gate# console switch

<Ctrl>-e c .

gate# tail -f /var/log/conserver/switch.log