This is an old revision of the document!
[gate:~] # pkg_add -r dynagen [gate:~] # rehash
root@gate:~# apt-get install dynagen
gate# dynamips -H 7200 &
gate# cat gate.net
[localhost] # host with dynamips [[ROUTER GATE]] image = c7200-is-mz.123-21.bin ram = 160 # F0/0 = NIO_gen_eth:em0 # for FreeBSD # F0/0 = NIO_linux_eth:eth0 # for Linux # F1/0 = NIO_linux_eth:vlan2 # for Linux
gate# dynagen gate.net
=> list Name Type State Server Console GATE 7200 running localhost:7200 2000
=> shell telnet localhost 2000
... --- System Configuration Dialog --- Would you like to enter the initial configuration dialog? [yes/no]: no
Router# show run
hostname dynamips.corpX.un interface FastEthernet0/0 ip address 192.168.X.101 255.255.255.0 no shut !config for FreeBSD with dot1q (F0/0 = NIO_gen_eth:em0) !interface FastEthernet0/0.2 ! encapsulation dot1Q 2 ! ip address 192.168.100+X.101 255.255.255.0 ! no shut !config for FreeBSD with dot1q (F1/0 = NIO_linux_eth:vlan2) !interface FastEthernet1/0 ! ip address 192.168.100+X.101 255.255.255.0 ! no shut router ospf 100 network 192.168.X.0 0.0.0.255 area 0 redistribute connected subnets
[gate:~] # cat router.net
[localhost] [[ROUTER ROUTER]] image = c7200-is-mz.123-21.bin ram = 160 F1/0 = NIO_linux_eth:eth1 F1/1 = NIO_linux_eth:eth0
[gate:~] # cat simple1.net [localhost] [[7200]] image = c7200-is-mz.123-21.bin npe = npe-400 ram = 160 [[ROUTER R1]] s1/0 = R2 s1/0 [[router R2]]
[gate:~] # cat qemulab.net [localhost] [[7200]] image = c7200-is-mz.123-21.bin ram = 96 [[ROUTER R13]] F0/0 = NIO_gen_eth:fxp0 F1/0 = NIO_gen_eth:tap0
[gate:~] # cat distrlab.net [172.16.1.X] [[7200]] image = c7200-is-mz.123-21.bin ram = 96 [[ROUTER R1]] s1/0 = R2 s1/0 F0/0 = NIO_gen_eth:fxp0 [172.16.1.Y] workingdir = /root [[7200]] image = c7200-is-mz.123-21.bin ram = 96 [[ROUTER R2]] F0/0 = NIO_gen_eth:sis0