User Tools

Site Tools


сервисы_gateway_и_routing

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
сервисы_gateway_и_routing [2022/01/29 12:31]
val [NetFilter iproute2 (Linux)]
сервисы_gateway_и_routing [2022/07/05 06:53]
val [Debian/Ubuntu]
Line 13: Line 13:
 net.ipv4.ip_forward = 1 net.ipv4.ip_forward = 1
  
-root@gate:​~#​ cat /​etc/​sysctl.conf+root@gate:​~#​ cat /etc/sysctl.d/​20-my-forward.conf
 </​code><​code>​ </​code><​code>​
-... 
 net.ipv4.ip_forward=1 net.ipv4.ip_forward=1
-... 
 </​code><​code>​ </​code><​code>​
-root@gate:​~#​ sysctl -f+root@gate:​~#​ sysctl -p --system ​
 </​code>​ </​code>​
  
Line 125: Line 123:
  
 === Установка === === Установка ===
- 
-=== FreeBSD === 
-<​code>​ 
-[gate:~] # pkg install quagga 
- 
-[gate:~] # cd /​usr/​local/​etc/​quagga/​ 
-</​code>​ 
  
 === Debian/​Ubuntu === === Debian/​Ubuntu ===
Line 154: Line 145:
 enable password zebra enable password zebra
 </​code>​ </​code>​
- 
-=== Запуск === 
  
 === FreeBSD === === FreeBSD ===
 <​code>​ <​code>​
-[gate:~] # cat /​etc/​rc.conf +[gate:~] # pkg install quagga 
-</​code><​code>​ + 
-... +[gate:~] # cd /​usr/​local/​etc/​quagga/
-quagga_enable="​YES"​ +
-quagga_daemons="​zebra ospfd"​ +
-</​code><​code>​ +
-[gate:~] # /​usr/​local/​etc/rc.d/​quagga ​start+
 </​code>​ </​code>​
  
-=== Debian ===+=== Запуск === 
 + 
 +=== Debian/​Ubuntu ​===
 <​code>​ <​code>​
 # service zebra start # service zebra start
Line 175: Line 162:
 </​code>​ </​code>​
  
-=== Ubuntu ​===+=== FreeBSD ​===
 <​code>​ <​code>​
-root@gate:~# cat /etc/quagga/​daemons+[gate:~# cat /etc/rc.conf
 </​code><​code>​ </​code><​code>​
 ... ...
-zebra=yes +quagga_enable="​YES"​ 
-... +quagga_daemons="​zebra ​ospfd"
-ospfd=yes +
-...+
 </​code><​code>​ </​code><​code>​
-root@gate:​~# ​chown -R quagga ​/etc/quagga/ +[gate:~/usr/local/etc/rc.d/quagga start
- +
-root@gate:​~#​ service ​quagga start+
 </​code>​ </​code>​
  
Line 284: Line 267:
  
 # ip rule add prio 100 from 192.168.X.0/​24 to 192.168.X.0/​24 table main # ip rule add prio 100 from 192.168.X.0/​24 to 192.168.X.0/​24 table main
-# ip rule add from 192.168.X.0/​25 table 101 +# ip rule add prio 200 from 192.168.X.0/​25 table 101 
-# ip rule add from 192.168.X.128/​25 table 102+# ip rule add prio 300 from 192.168.X.128/​25 table 102
  
 # ip rule show # ip rule show
  
-# ip rule del from 192.168.X.0/​24 to 192.168.X.0/​24 table main +# ip rule del prio 300 
-# ip rule del from any table 101 +# ip rule del prio 200 
-# ip rule del from any table 102+# ip rule del prio 100
  
 # ip route del default via 172.16.1.254 table 101 # ip route del default via 172.16.1.254 table 101
Line 307: Line 290:
  
 iptables -t nat -A POSTROUTING -o eth1 -s 192.168.X.0/​24 -j SNAT --to-source 172.16.1.X iptables -t nat -A POSTROUTING -o eth1 -s 192.168.X.0/​24 -j SNAT --to-source 172.16.1.X
-iptables -t nat -A POSTROUTING -o eth3 -s 192.168.X.0/​24 -j SNAT --to-source 172.16.2.X+iptables -t nat -A POSTROUTING -o eth2 -s 192.168.X.0/​24 -j SNAT --to-source 172.16.2.X
  
 conntrack -F conntrack -F
Line 322: Line 305:
         ​         ​
         post-up ip rule add prio 100 from 192.168.X.0/​24 to 192.168.X.0/​24 table main         post-up ip rule add prio 100 from 192.168.X.0/​24 to 192.168.X.0/​24 table main
-        post-up ip rule add from 192.168.X.0/​25 table 101 +        post-up ip rule add prio 200 from 192.168.X.0/​25 table 101 
-        post-up ip rule add from 192.168.X.128/​25 table 102+        post-up ip rule add prio 300 from 192.168.X.128/​25 table 102
         ​         ​
         address 192.168.X.1         address 192.168.X.1
сервисы_gateway_и_routing.txt · Last modified: 2022/09/22 13:05 by val